Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Orlando Owner’s Guide
A full KraftMaid bathroom remodel in Orlando typically runs $9,000 to $28,000 installed, depending on whether we’re replacing a vanity or gutting the room to the studs. We work on KraftMaid cabinets, vanities, and drawer hardware daily, and most failures we see are hardware-level, not cabinet-level, which means the fix is usually a $200 to $600 repair rather than a full replacement. You’ll know something’s wrong when a drawer scrapes against the frame, a door sags so far it won’t latch, or a soft-close hinge stops catching and the door slams shut.
The most common call we get from Orlando homeowners is a vanity drawer that’s dropped half an inch and started chewing into the cabinet face below it. That’s almost always a failed undermount slide, and KraftMaid uses specific slide lengths and mounting hole patterns that generic big-box slides don’t match. We’ll get into that below.
Which KraftMaid Models This Applies To
KraftMaid builds across several cabinet lines – Vantage, Venicia, and the standard KraftMaid series – and bathroom vanities from each line use different hinge cups, slide profiles, and door bumper offsets. Vantage uses a 35mm European hinge cup with a specific overlay; Venicia often runs a different clip plate for framed construction. If you pull a hinge off and see a stamped number on the cup, that’s the easiest way to identify what you have. We can match it from that stamp.
Here’s the compatibility gotcha worth knowing: KraftMaid changed its drawer slide supplier around 2018, so a 2015 vanity and a 2021 vanity from the same “KraftMaid” label often take different slides. The old ones are 3/8″ thick with a top-mount clip; the newer ones run a side-mount rail with a different release tab. We keep both on the truck in Orlando because we see this mismatch on at least one job a week.
For hinges and slides, we stock OEM KraftMaid parts plus quality aftermarket equivalents from Blum and Salice – the same manufacturers KraftMaid uses, often with the KraftMaid logo swapped for the manufacturer’s. The aftermarket part is functionally identical and usually saves you $15 to $40 per hinge set, but if you’d rather stay OEM, we order direct and it’s typically here in three business days.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer drops or scrapes the cabinet face. The undermount slide has lost its roller or ball bearing cage. Orlando humidity accelerates the grease breakdown in the slide, and once the bearing cage cracks, the drawer rides metal-on-metal and drops. This is also why you’ll hear a grinding sound when opening it.
- Door won’t stay closed or hangs off-square. The hinge cup has loosened in the particleboard or the internal spring in the soft-close mechanism failed. KraftMaid doors are heavy, and once one hinge loses its bite, the door twists and the second hinge follows. Tightening screws rarely fixes it for more than a week.
- Soft-close stops working, door slams. The damping cylinder inside the hinge has lost its fluid. This happens faster in Florida heat – garages and upstairs bathrooms in Orlando regularly hit 90°F plus, and the damper seals dry out. Once it slams, the door face and frame start taking stress they weren’t designed for.
- Finish bubbling or peeling at the bottom edge of the vanity. Water from sink splashes or a slow drain leak has been wicking into the cabinet base. KraftMaid uses a thermofoil or painted MDF bottom panel, and once water gets under the edge banding, it lifts. This is the one repair that often does justify a new vanity base rather than a part swap.
- Drawer front separates from the drawer box. The front is attached with dowels and adhesive, and in a bathroom, repeated steam exposure breaks that bond. You’ll see a hairline gap at the top of the drawer front first. If you catch it early, we can re-glue and clamp it; if it’s allowed to rack, the dowels wallow out and the box needs replacement.
Replacement Cost & What’s Included
Our KraftMaid bathroom work in Orlando breaks down into three general tiers. Hardware-level repair – hinges, slides, soft-close dampers, drawer front reattachment – runs $200 to $600. A full vanity replacement with installation, plumb disconnection and reconnection, and disposal lands between $800 and $3,000. A complete bathroom remodel, which is what most KraftMaid owners call about when they’ve decided the whole room needs to match the cabinet, runs $9,000 to $28,000.
The range comes down to what’s behind the walls. If your Orlando home is 1980s or older, expect cast iron plumbing that may need a section replaced, and possibly water-damaged subfloor under the tile. KraftMaid materials are the predictable part; the surprises are behind the vanity. That’s why we write the price after opening the wall, not before we’ve seen it. Every quote is line-itemed: cabinet and hardware cost, demolition, plumbing, drywall repair, tile setting, trim. The number you approve is the number you pay.
All our KraftMaid repair work carries the 365-Day Done Right Promise. If a hinge drop or slide fails inside a year, we come back and make it right, in writing, no argument.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
For a soft-close hinge or a drawer slide, a careful homeowner with a Phillips driver can absolutely swap the part – assuming you’ve matched the right KraftMaid slide length and hinge overlay. That’s where it goes wrong. We regularly drive out to an Orlando homeowner who bought a “universal” slide from a big-box store, mounted it, and discovered the drawer now sits 1/8″ proud or the soft-close tab doesn’t line up. Then the drawer face is rubbing the frame and the homeowner has drilled extra holes in the cabinet side.
If you’ve got a vanity back that’s swelled from a water leak, don’t open the drywall behind it yourself. Orlando bathroom supply lines are often original galvanized or polybutylene in older neighborhoods like College Park, and you don’t want to find out the hard way that the shutoff valve doesn’t hold. We deal with that every week. Call (850) 809-0306 and we’ll tell you honestly whether it’s a ten-minute parts swap or something bigger – before anyone picks up a tool.
FAQs
A KraftMaid vanity in an Orlando bathroom typically lasts 15 to 20 years, but hinges and slides usually need replacement at the 8 to 12 year mark because Florida humidity degrades the grease and damping fluid faster than in dry climates. The cabinet box itself can easily go 25 years if the plumbing doesn’t leak. Call (850) 809-0306 for a free evaluation if yours is showing age.
Most KraftMaid failures we see in Orlando are repairable: hinge replacement, slide swap, drawer front reattachment, and even water-damaged bottom panels can often be cut out and replaced without pulling the whole vanity. Full replacement only makes sense when water has wicked up the sides or the cabinet box has racked from a long-term leak. We’ll tell you which one you have before we sell you either.
A hardware-level repair is done in under an hour, a vanity swap is a single day, and a full KraftMaid bathroom remodel in Orlando typically runs two to four weeks depending on tile work and plumbing scope. We give you a written schedule at the start and photo updates while we’re working so you’re not left wondering what’s happening behind the closed door. Call (850) 809-0306 to get a timeline for your exact project.
Yes, we stock the most common KraftMaid hinge cups, soft-close dampers, and both pre-2018 and post-2018 drawer slides on our trucks, so most repairs are same-visit. Oddball sizes or specific finish-matched fronts get ordered and typically arrive within three to five business days in Orlando. Estimates for any KraftMaid repair are free at (850) 809-0306.
KraftMaid Materials and The Sawyer Standard
We’re an independent Orlando general contractor – not affiliated with KraftMaid – but we install and service KraftMaid cabinetry because it’s a product we can stand behind, along with Wellborn cabinets, Cambria and Silestone counters, and Kohler fixtures. When we handle your bathroom remodel, every one of those materials gets installed under the Relay Visibility Guarantee: live arrival time for our background-checked, uniformed technicians, photo updates before and after, and a written price before any work starts.
Luca Romano has spent nearly two decades in finish carpentry and structural work, and he’s pulled apart enough failing vanities in Orlando to know exactly which KraftMaid part is failing before he opens the drawer. Good work doesn’t need a speech – it just needs to hold up.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
