Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Kitchen Remodeling: The Orlando Owner’s Guide
An IKO kitchen remodel in Orlando typically runs between $14,000 and $45,000 installed, depending on cabinet count, countertop material, and whether walls or plumbing move. Most IKO homeowners reach out to us when a kitchen component fails, usually a cabinet hinge pulling out of a particleboard side, a drawer slide grinding, or a laminate countertop delaminating at the sink seam. The good news: we stock IKO-compatible replacement hardware and can usually match your existing cabinet profile without replacing the whole run. We’re an independent Orlando contractor, not an IKO dealer, so our priority is fixing what you already paid for, not upselling a full teardown.
Quick answer: We install and repair IKO kitchen cabinetry and components throughout Orlando, with most repair calls resolved in a single visit and full remodels running $14,000 – $45,000. Call (850) 809-0306 for a written, line-item quote before any work starts.
Which IKO Models This Applies To
IKO cabinetry shows up in Orlando under several model lines, most commonly the Dynasty and Signature series, plus builder-grade Essentials boxes in newer subdivisions around Lake Nona and Horizon West. The quickest way to identify your line is to look inside the door of a base cabinet: IKO stamps the model code on a small white label near the top hinge, usually something like IKO-DY-36-B3. The first two letters tell you the series. Dynasty runs a full ⅝-inch side panel with dovetailed drawers; Essentials uses ½-inch panels and stapled joints. That difference matters for repairs. A Dynasty drawer can usually take a replacement glide and new front clips; an Essentials box often can’t hold a second screw set without the particleboard giving way.
One compatibility gotcha we’ve learned the hard way in Orlando: IKO changed its hinge boring pattern in 2019. Pre-2019 doors use a 35mm cup bore at 3mm inset; post-2019 doors shifted to a 40mm cup. If you grab the wrong replacement hinge, the door sits proud and the soft-close never engages. We carry both bore patterns on the truck. Aftermarket equivalents from Blum and Grass generally outperform IKO’s stock hardware, but the bore pattern has to match or you’re drilling new cups, which is a cabinet shop job, not a home center fix.
Styles & brands we work with
Signs Your IKO Kitchen Remodeling Is Failing
- Doors that won’t stay closed or swing open on their own. This is almost always a worn hinge spring or a stripped screw hole. On IKO cabinets, the screw holes strip before the hinge fails, especially on doors over 24 inches wide. Once the screw spins without biting, the door sags and the gap at the top grows.
- Drawers that grind, stick, or drop when you open them. IKO’s older epoxy-coated slides collect flour and dust in Orlando’s humidity, turning a smooth glide into sandpaper. The slide is usually fine underneath; it’s the ball bearing carrier that’s gummed up. But if you push through it too long, the drawer side wears and the fix gets more expensive.
- Countertop lifting or dark swelling at the sink. Laminate countertops fail first at the dishwasher return and around the sink faucet. Water wicks into the particleboard core, swells, and the laminate pops. This isn’t an IKO-specific defect; it’s what particleboard does in a kitchen. The only real fix is replacing the countertop run.
- Soft-close stops working on one door but not the others. That’s a failed hydraulic piston inside the hinge. The door still functions; it just slams. It’s a five-minute swap if the bore matches, and we’ve replaced hundreds of these across Orlando homes.
- Cabinet boxes pulling away from the wall. This is the one you don’t ignore. If a uppers run starts to tip forward, the mounting screws weren’t set into studs properly at install, or the drywall anchors have sheared. That’s a load-bearing failure waiting to happen, and it’s why Luca Romano tells his crew: check every upper cabinet mount before we touch anything else on the job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the straight pricing for Orlando, no vague “call for a quote” runaround:
- Full IKO kitchen remodel: $14,000 – $45,000 depending on cabinet count, countertop material, and whether you move plumbing or electrical.
- Cabinet-only replacement (IKO boxes, new doors, hardware): $4,000 – $13,000 installed.
- Countertop replacement (laminate, quartz, or solid surface): $2,000 – $6,500 installed including sink cutout and backsplash removal.
- Island addition or rebuild: $3,000 – $10,000 including cabinet base, countertop, and electrical if needed.
- Single-cabinet repair (hinge swap, drawer glide replacement, door rehang): typically $150 – $400, parts included, with the written price confirmed before we start.
Every quote from Sawyer Remodel Orlando lands in writing before a single tool is picked up. That’s the Relay Visibility Guarantee: who’s coming, when they arrive, what it costs. The number you approve is the number you pay. And every repair carries our 365-Day Done Right Promise. If the part fails or the work doesn’t hold within a year, we come back and make it right, no argument.
DIY or Call Us?
Here’s the honest split. You can absolutely swap a soft-close hinge or a drawer glide yourself if the bore pattern matches and the screw holes are intact. IKO cabinets are straightforward; a $12 hinge and a Phillips driver will fix a slamming door in ten minutes. But if the screw holes are stripped, the drawer side is worn, or an upper cabinet has pulled from the wall, stop. Stripped particleboard doesn’t hold a new screw, and drilling into a cabinet that’s about to drop is how kitchens go from a $200 repair to a $4,000 replacement. Upper cabinets are load-bearing, and the hardware holding them to your wall is safety equipment, not trim. If you’re in Orlando and the cabinet moves when you touch it, call us at (850) 809-0306 and let a background-checked tech take a look before it becomes a bigger problem.
FAQs
In Orlando’s heat and humidity, IKO cabinets typically last 10 to 15 years before hinges, drawer glides, or door faces need real attention. The boxes hold up; it’s the moving hardware and laminate surfaces that fail first. Good ventilation and a dehumidifier buy you years.
Yes, most failures are repairable: hinges, slides, door rehangs, and drawer rebuilds are routine for us. The exceptions are swollen particleboard from water damage and boxes that have pulled from the wall. Water-damaged IKO boxes can’t be dried out and glued back; the material is done.
A full IKO kitchen remodel typically takes 3 to 5 weeks in Orlando, depending on countertop fabrication time and whether plumbing or electrical moves. A cabinet-only replacement runs 3 to 5 days; countertops take about a week with templating. We build the schedule in writing before we start, and you get photo updates along the way so you’re never guessing what happened on the jobsite.
We stock IKO hinge replacements in both bore patterns, drawer glides, door bumpers, and mounting hardware on every truck we send into Orlando. If we don’t have the specific part, we order it directly and the quote already accounts for the parts, so there are no surprises on the invoice.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
Call (850) 809-0306 for a free on-site estimate. We’ll match your IKO cabinets to the right hardware, put a written price in your hands before any work starts, and show up when we say we will. Good work doesn’t need a speech; it just needs to hold up.
