Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Orlando Owner’s Guide
Boral fence installation in Orlando typically runs $3,500 to $9,000 for a full panel-and-post replacement, and we can usually have the material matched and the job scheduled within a week. Most homeowners call us after a storm or a few years of Florida sun have done their work: a post has gone soft at the base, a panel has cracked along the top rail, or the whole section has started to lean toward the neighbor’s yard. You know the part that failed because you can see it. What you may not know is whether to patch it, replace one section, or stop feeding money into a fence that’s giving up. That’s what this page is for.
Which Boral Models This Applies To
Boral’s fence line isn’t a dozen different systems. It’s a composite-and-wood hybrid built around a few consistent profiles, which is good news when you’re trying to match an existing section. The most common in Orlando are the standard picket panels in 6-foot and 8-foot widths, usually paired with 4×4 or 5×5 routed posts. The compatibility gotcha: Boral panels are notched to fit a specific post-routing depth, so a generic pressure-treated post from the big-box store won’t give you the same seated fit. If the post is the part that failed, we order a routed post matched to the panel groove, not a shelf post and a prayer.
On the OEM-versus-aftermarket question: for the panel face itself, Boral’s material is a polypropylene-and-ash blend that holds paint better than vinyl and resists rot better than cedar. Aftermarket “compatible” panels exist, but the color match and the expansion gaps are never quite right in Florida’s heat-and-humidity cycle. We’ve installed enough of both to tell you: when the part is visible, stay with OEM Boral or a matched Boral-spec equivalent. When the part is structural but hidden, like a post sleeve or a bottom rail, a quality aftermarket equivalent saves money without costing you the look.
Sawyer Remodel Orlando is an independent contractor; we’re not affiliated with Boral, and we don’t pretend to be. We just know the product line well enough to order the right part the first time.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Post leaning at the base. In Orlando’s sandy, fast-draining soil, posts can shift after a heavy rain season even when the concrete footing looked fine. The post itself is usually still sound; the footing or the post-to-panel connection is what gave out.
- Panel cracked along the top rail. This is the classic Boral failure in Florida sun. The polypropylene blend expands and contracts more than wood, and over years of direct afternoon heat, the top rail seam is where the stress concentrates. A cracked top rail means the panel’s structural job is done.
- Paint peeling in sheets, not flakes. Boral holds paint longer than vinyl, but when the surface prep was wrong at install, you’ll see wide peeling rather than normal wear. That’s a top-coat adhesion failure, and it won’t fix itself with another coat.
- Gate sagging or dragging. The panel sections carry weight differently than a gate frame, and when a Boral gate starts dragging on the latch side, the hinge posts or the gate frame itself has shifted. Shim it and it’ll sag again; the part that failed is usually the post connection.
- Soft spot at the bottom of a post. Even composite-and-ash posts sit in wet soil. If you can press a screwdriver into the post base after a rainy week, the post is rotting from the ground up, and the fix is a new post, not a sleeve.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Boral fence installation in Orlando, you’re looking at $3,500 to $9,000 for a typical residential project. The spread comes down to three things: how many linear feet of panel and post we’re replacing, whether the soil demands deeper or wider concrete footings, and whether we’re matching existing Boral panels or starting fresh on a full run.
- Single post replacement: typically $200 to $450, including footing removal and re-set
- Single panel replacement: typically $180 to $350, including rail matching and fasteners
- Full fence install (Boral panels, posts, hardware): $3,500 to $9,000, depending on linear feet and gate count
Every quote is written, line-itemed, and in your hands before we touch a single post. You’ll know the panel cost, the post cost, the concrete, the hardware, and the labor hours. The 365-Day Done Right Promise covers the workmanship for a full year: if a panel shifts, a gate sags, or a footing settles, we come back and make it right. No argument, no invoice.
DIY or Call Us?
You can safely check two things yourself: whether the panel is cracked through the rail (visible, no tools) and whether a post base is soft enough to press with a flathead screwdriver. That tells you what failed, but not necessarily why. Where DIY goes sideways is the post setting. Boral panels are heavy, a 6-foot section can run 40 pounds or more, and if a post is off by even a half-inch in plumb, the panel won’t seat, the gate won’t latch, and you’ll be doing it twice. Combine that with Orlando’s sandy soil, which needs deeper footings than the national average, and it’s a job that punishes shortcuts. If you’d rather have it done once, call (850) 809-0306 and we’ll get you a written price before any work starts.
FAQs
A properly set Boral fence lasts 20 to 30 years in Florida, with the panels outlasting the post footings in most cases. The posts are the first thing to go in Orlando’s wet-dry cycles; the panel material itself rarely rots. Call (850) 809-0306 if your posts are leaning and you want a straight answer.
Small hairline cracks can sometimes be stabilized with a structural adhesive, but a crack through the top rail means the panel’s load path is broken and replacement is the honest fix. We’ll tell you which one you have when we see it. Call (850) 809-0306 to schedule a look.
A typical post-and-panel replacement takes one to two days on site, plus a few days for the Boral material to arrive if we have to order it. Post footings need to cure before we hang weight on them. Call (850) 809-0306 and we’ll give you a schedule with a concrete arrival time, not a four-hour window.
We keep common Boral panel sizes, routed posts, gate hardware, and post sleeves stocked in our Orlando shop, so simple replacements often happen same visit. If it’s an odd-sized panel or a color-match special order, we’ll tell you the lead time up front. Call (850) 809-0306 with your panel measurements and we’ll check inventory while you’re on the phone.
Good work doesn’t need a speech – it just needs to hold up. That’s how we build, and that’s how we stand behind it. Call (850) 809-0306 for a free Boral fence installation estimate in Orlando. You’ll get a written price, a live arrival time, and photo updates before and after the work. No surprises at the invoice.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
