Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Orlando Owner’s Guide
PGT fence installation in Orlando typically runs $3,500 to $9,000 for a complete vinyl fence system, including materials, labor, and removal of the old fence where needed. Most full fence replacements take 2 to 4 days depending on linear footage and whether we’re pulling old concrete footers.
If you’re here, you likely already know the frustration: a PGT product that looked great for years, and now a section is leaning, a post cracked at the base, or a gate doesn’t swing right anymore. Sometimes it’s storm damage from one of Orlando’s summer squalls. Sometimes it’s a post that shifted in sandy soil after years of wet/dry cycles. Either way, you want it fixed without a runaround. That’s what we do.
We’re Sawyer Remodel Orlando, and we’re an independent contractor based right here in Orlando. We’re not affiliated with PGT directly, but we work with their product lines regularly and know how they install, what fails first in Florida weather, and what it costs to fix properly. If you need a PGT fence installed, repaired, or replaced in Orlando, call us at (850) 809-0306 for a written quote before any work starts.
Which PGT Models This Applies To
PGT’s vinyl fence line runs through a few main product families you’ve likely seen in Orlando neighborhoods: the three-rail and two-rail styles, privacy panels, and semi-privacy with decorative lattice tops. The critical compatibility detail is the post size and wall thickness. PGT vinyl posts come in 4×4 and 5×5 profiles depending on fence height, and the wall thickness varies by product generation. Older PGT fences from the 2000s often used thinner-walled posts that don’t accept newer rail brackets without shimming.
Here’s the gotcha we see constantly in Orlando: PGT changed rail bracket design around the mid-2010s. If you’re trying to match a section using newer brackets on an older post, the bracket seats differently and the rail can sit proud or sag. We identify the right part by measuring the post wall thickness with a caliper and matching the rail profile, not just the fence color. For OEM versus aftermarket, PGT-branded replacement parts cost 30 to 50 percent more than quality aftermarket equivalents, and for most Orlando homes, a good aftermarket bracket and rail matched to the original dimensions performs identically. We stock both and will tell you honestly which makes sense for your fence.
Styles & brands we work with
Signs Your PGT Fence Installation Is Failing
- Post lean at the base: In Orlando’s sandy soil, a post that wasn’t set deep enough or given enough concrete will start to tilt after a few years of heavy rain. This is the most common failure we see, and it almost always means the post needs to be reset, not just propped up.
- Cracked post corners near the top: Vinyl expands and contracts in Florida’s heat, and a post that was over-tightened or installed without room for movement will crack. Once a crack forms, it spreads every summer.
- Rails sagging between posts: This usually means the rail brackets have stretched or the rail itself has warped from direct sun exposure on the south-facing side of the fence. Orlando gets intense UV, and older PGT rails without UV stabilizers will soften over time.
- Gate dragging or binding: The hinge post shifts slightly, and suddenly the gate scrapes the ground or won’t latch. Sometimes it’s just adjustment, but often the post itself has moved and needs to be re-set.
- White chalky residue on the surface: That’s vinyl oxidation from Florida’s sun and humidity. It’s cosmetic at first, but it means the surface is degrading, and scrubbing it hard actually accelerates the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full PGT fence installation in Orlando, you’re looking at $3,500 to $9,000 depending on linear footage, fence height, gate count, and whether we’re removing an old fence and hauling it away. A partial repair, like resetting two leaning posts and replacing a damaged section, typically runs $500 to $1,500. Here’s the breakdown:
- Full vinyl fence replacement (materials + labor): $25 to $45 per linear foot installed
- Post reset with new concrete footer: $150 to $300 per post
- Rail bracket replacement (all rails on one section): $75 to $150 per section
- Gate hinge and latch replacement: $100 to $250 per gate
- Old fence removal and haul-off: $200 to $600 depending on footage
Every quote from Sawyer Remodel Orlando is written before we start, line by line. The number on the invoice is the number you approved. No change orders, no surprise upcharges. We include the removal and disposal in the quote up front, and our 365-Day Done Right Promise covers the work in writing. If something isn’t holding up a year later, we make it right.
DIY or Call Us?
The honest answer: you can reset a single leaning vinyl post yourself if you’re comfortable digging a 30-inch hole in Orlando’s sandy soil and mixing concrete. It’s physical work, not technical work. What you should not DIY is anything involving fence removal next to underground utilities. In Orlando, water lines, irrigation lines, and cable lines often run within a few feet of the fence line, and hitting one turns a $200 post reset into a $2,000 repair.
Call 811 before you dig. It’s free. But if you’d rather not spend a weekend sweating through a 90-degree Orlando afternoon, or if your fence has multiple failing posts and you want it done right with a written guarantee, call us at (850) 809-0306. Luca Romano and our crew handle PGT fence installation in Orlando regularly, and we’ll give you a straight answer on whether repair or replacement makes more sense for your situation.
FAQs
A properly installed PGT vinyl fence in Orlando typically lasts 15 to 25 years, with posts lasting the longest when set with adequate concrete depth and rails showing wear first from UV exposure. The real lifespan killer in this area is improper post installation, not the vinyl itself.
Yes, in most cases a single damaged section or leaning post can be repaired without replacing the whole fence, usually for $150 to $300 per post or $75 to $150 per rail section. The exception is when multiple posts have shifted or the vinyl has oxidized badly enough to crack through the wall thickness. Call (850) 809-0306 for a quote on what’s actually needed at your property.
Most full PGT fence installations in Orlando take 2 to 4 days from post setting to final gate adjustment, depending on linear footage and how much old fence needs removing. Concrete needs 24 hours to cure before we hang rails, so there’s always at least one overnight in the schedule. We’ll give you a day-by-day plan in writing before we start.
We stock common PGT-compatible rails, brackets, gates, and post caps on our trucks for most repair jobs, and we order specific PGT OEM parts when needed, usually with 3 to 5 day turnaround in Orlando. We also stock replacement parts for KraftMaid, Cambria, and Silestone products across our remodeling work. If your part is in stock, we can often complete the repair same visit.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
