Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Orlando Owner’s Guide
If you have a CGI kitchen and a component has failed, a full-scope kitchen remodel in Orlando runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and how much structural work the space needs. Most homeowners discover the problem the same way: a cabinet door that won’t stay aligned, a drawer slide that grinds, or a hinge that’s given up after years of Florida humidity working on the hardware. We stock common CGI replacement components on our trucks and can usually match your existing setup the same day we diagnose it.
Which CGI Models This Applies To
CGI kitchen cabinetry ships in several series lines, and the hardware specs change between them. If your cabinet boxes are factory-finished with a stamp on the interior side panel or the back of a drawer face, that label tells us the series, the color code, and the original hardware spec. The two details we need before we order: the cabinet width in inches and the hinge bore pattern, which on CGI units is typically 35mm full-overlay but can shift to 26mm on older compact lines. We also match drawer-slide length to the box depth, never by guesswork. For replacement parts, we default to OEM when the cabinet face is still in production, and use quality aftermarket equivalents when the original line has been discontinued or the lead time would leave your kitchen half-functional. The honest tradeoff is finish matching: OEM gets you an exact color match, while aftermarket gets you a working part sooner and usually at a lower price. Sawyer Remodel Orlando is an independent service provider, not affiliated with CGI, which means we stock what actually fails in Florida kitchens, not what a corporate parts catalog says should fail.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
Here are the five symptoms we see most often in Orlando homes, and what each one actually means:
- Cabinet doors that drift or won’t stay closed. The hinge spring has worn out or the hinge plate has loosened from the cabinet side. In older CGI lines, the hinge cup hardware was pressed in rather than screwed, and once it starts to wobble, tightening won’t save it.
- Drawers that stick, angle, or drop on one side. The slide rail has lost its ball bearings or the rear mounting clip is pulling out of the box. Humidity in Orlando accelerates this because the particleboard box absorbs moisture and softens around the screw holes.
- Soft-close stops working. The damper inside the hinge or slide has aged out. These are small hydraulic components with a real lifespan, usually seven to ten years in a Florida kitchen, less if the cabinet gets daily heavy use.
- Faces or doors pulling away from the box. Either the hinge mounting pads are stripped or the face frame joint is separating. This shows up most in kitchens above a dishwasher or oven, where heat cycles do steady damage.
- Finish chipping or peeling along the bottom cabinet run. Water from mopping and sink splashes sits at the toe-kick seam and wicks behind the finish. Once that starts, the door skin is compromised and the panel needs replacement, not resurfacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is the real Orlando pricing, in writing, the same way we give it on every job. A full CGI kitchen remodel runs $14,000 to $45,000. A smaller kitchen falls between $9,000 and $20,000. Cabinet installation alone is $4,000 to $13,000; countertop installation $2,000 to $6,500; backsplash $800 to $2,500; and a kitchen island $3,000 to $10,000. The range depends on the size of the run, the countertop material, and whether we are reusing any of the existing boxes. Every quote we give is a written price before work starts, and that is the number on the invoice when we finish, not a starting point. All labor and parts are covered by the 365-Day Done Right Promise: if something fails within a year of install, we return, repair it, and stand behind it in writing. No change orders, no surprise line items.
DIY or Call Us?
You can safely check a few things yourself. Open a working cabinet and compare the hinge cup screws to the failing one. Look for a visible stamp inside the box or on the drawer back. Snap a photo of the hardware you see. That information helps us bring the right part on the first visit. What gets people into trouble is swapping hinges or slides on a loaded cabinet. The door weight pulls the new screw out of a stripped bore, or the alignment eats the new hinge in a month, and now you have paid twice for the same repair. Cabinet hardware is low voltage and low drama compared to high-tension springs, but precision still matters. If any gas strut or lift mechanism is involved on an upper cabinet, leave that alone entirely. Call us at (850) 809-0306 with the photo, and we’ll tell you if it’s a simple match or worth a service visit.
FAQs
A CGI kitchen in Orlando typically lasts 15 to 25 years for the boxes and 10 to 15 for the moving parts, but Florida humidity cuts hardware life by a third compared to dry climates. If your hinges and slides are original and the kitchen is over a decade old, plan for replacement hardware before the doors start sagging.
It depends on the failure. Stripped screw holes can often be re-bored and filled with a hardwood dowel, but a blown soft-close damper is a sealed component and gets replaced, not rebuilt. We’ll always tell you which one you have before charging anything. Call (850) 809-0306 and we’ll walk through it.
Most hinge or slide replacements take one to two hours for a single cabinet, and a full kitchen hardware refresh is usually a single day. If multiple door faces need replacement, add the lead time for the order, which depends on whether the CGI finish is still in production.
We stock common CGI hinge and slide replacements on our service trucks, including 35mm full-overlay hinges, standard soft-close dampers, and full-extension drawer slides in the most common lengths. If your part is discontinued or the finish is non-standard, we source from a local Orlando supplier and have it within days, not weeks. We also stock compatible hardware for KraftMaid, Cambria, and Silestone systems.
If your CGI kitchen has a part that’s failing, don’t let it turn into a bigger project. Call Sawyer Remodel Orlando at (850) 809-0306 for a free estimate. We’ll tell you what’s wrong, what it costs, and when we can fix it. Good work doesn’t need a speech, it just needs to hold up.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
