Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Orlando Owner’s Guide
A full CGI bathroom remodel in Orlando typically runs $9,000 to $28,000 installed, depending on whether you’re doing a cosmetic refresh or moving plumbing and reconfiguring the footprint. If you’re reading this, you’ve likely got a CGI vanity, tub, or shower enclosure that’s failed, or you’re staring at cracked tile, failing grout, or a shower pan that’s started seeping into the subfloor. We stock and install CGI-compatible bathroom components and can usually match the existing line within a day or two of sizing the opening.
Most homeowners discover the problem the hard way: a soft spot near the toilet flange, a vanity door that no longer sits square because the particleboard base swelled, or grout lines that stay dark and damp hours after the last shower. In Orlando’s humidity, that moisture doesn’t evaporate on its own. It feeds mold behind the wall and rots the framing underneath.
Which CGI Models This Applies To
CGI produces bathroom cabinetry and vanity lines in three general tiers: entry-level thermofoil and melamine units, mid-grade plywood-box vanities with solid wood doors, and their higher-end framed cabinetry that lands closer to semi-custom. The exact model matters because CGI changed hinge cup drilling depth and drawer glide mounting brackets between production runs. If you’re ordering a replacement door or drawer front rather than a full vanity swap, read the sticker inside the cabinet box. It’ll have a model code that starts with two letters followed by four digits.
Here’s the compatibility gotcha we see often in Orlando homes: CGI vanities sold through builder supply channels between 2010 and 2018 used 12-millimeter hinge cup spacing, while their current lines use 10-millimeter. Swap a door without checking and it’ll hang low or bind against the frame. We keep both hinge bore patterns in the truck because it’s a thirty-second check that saves a two-week reorder. As for OEM versus aftermarket: CGI doesn’t sell direct to consumers, so “OEM” parts usually come through a dealer with a markup and a lead time. Quality aftermarket equivalents for hinges, glides, and edge trim are often identical spec and available same-week. It’s an independent call we make per part, and we’re not affiliated with CGI, so we’ll tell you plainly which route costs less without sacrificing fit.
Styles & brands we work with
Signs Your CGI Bathroom Remodeling Is Failing
- Damp or swollen cabinet bases under the sink. The most common failure point in Florida bathrooms isn’t the vanity itself; it’s the particleboard sub-base CGI used on some builder-grade lines. Once water wicks up from a slow drain leak, the box never dries in Orlando’s humidity and the bottom shelf starts to crumble.
- Doors that won’t stay closed or aligned. Cheap self-closing hinges lose tension after a few thousand cycles. When the door drifts open on its own or the reveal gaps are uneven, the hinge arms are worn and need replacement rather than adjustment.
- Drawers that grind or drop when extended. CGI drawer glides on older models are side-mount rollers with a nylon wheel. When the wheel bearing gets gritty, the drawer rides rough. Left alone long enough, the glide bends and the drawer falls from its track entirely.
- Dark grout lines or recurring mildew at the tub or shower base. This tells you water is getting behind the tile or the pan. It’s not a cleaning problem. In Orlando’s climate, that moisture behind the wall is active mold within weeks.
- Loose or cracked tile around the vanity toe kick. Subfloor movement or swelling pushes tile off its bond. If you hear a hollow sound when tapping tile near the cabinet base, the underlayment is compromised and the tile will fail shortly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A CGI-focused bathroom remodel in Orlando falls into a few predictable bands. A small bathroom update with a new vanity, top, faucet, and minor tile work lands between $9,000 and $12,000. A mid-size bathroom that includes a new tub or shower, flooring, and upgraded fixtures runs $14,000 to $20,000. A full master bath renovation with moving plumbing, new shower pan, custom glass, and high-end finishes hits $22,000 to $28,000.
What drives the spread: whether we’re replacing a single failed component or tearing out water-damaged subfloor, whether the existing plumbing locations stay put, and which material tier you pick. Here’s what’s included on every job: a written line-item quote before work starts, all demolition and haul-away, the parts and fixtures, labor, and the workmanship warranty. The number we show you is the number you pay. If we open a wall and find rotted framing, we’ll show you photos before touching anything and give you a written change order before proceeding. No surprises at the invoice.
DIY or Call Us?
Some of this work is genuinely safe to handle yourself. Replacing a failed hinge, swapping a drawer glide, or tightening a loose faucet mount doesn’t take specialty tools. You know your limits though, and the danger zone is anything involving water supply lines, shower pans, or tile over a wet substrate. Cutting into a wall behind a failing shower without knowing what’s back there is how you turn a $4,500 tub-to-shower job into a $15,000 structural repair. If the failure involves a leaking pan, a visible floor depression, or tile that’s pulling away around the drain, water has already migrated. Getting that wrong means rot spreads under the slab or through the joists while you wait.
At Sawyer Remodel Orlando, we’ll come out, open the affected area, and tell you exactly what you’re looking at before quoting a dime. Call (850) 809-0306 and we’ll get you on the schedule for a free inspection.
FAQs
Builder-grade CGI vanities with particleboard boxes typically last 8 to 12 years in Orlando’s humidity before the base or end panels show real water damage, while the plywood-box lines can run 15 to 20 years if the plumbing stays dry. The finish and doors often outlast the box. Call (850) 809-0306 if you want an honest read on whether your vanity is worth repairing or replacing.
Yes, most single-component failures (hinges, glides, a swollen toe kick, one damaged door) can be repaired for a fraction of a full vanity swap. If water has swollen the cabinet box or the frame is racked, repair stops making sense and we’ll tell you so directly. Call (850) 809-0306 for a free estimate either way.
A small bathroom update runs 5 to 7 working days; a full master bath with plumbing relocation usually runs 14 to 21 working days. The variables are drying time for tile work, supply lead times on custom glass, and what we find when walls open. We’ll give you a written schedule with the quote and send photo updates as the work progresses. Call (850) 809-0306 and we’ll map out the timeline for your specific bathroom.
We keep the most common failure parts on hand: hinge sets in both bore patterns, side-mount drawer glides, edge trim, and standard toe kick material. For doors and drawer fronts, we’ll match the model code and order the exact piece, usually arriving within a week. If it’s an emergency shut-off valve issue or a leaking supply line, we handle that same visit. Call (850) 809-0306 and we’ll tell you over the phone what we have in the truck and what needs an order.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
