Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Orlando Owner’s Guide
If you have a Therma-Tru roofing product that’s failing, we can source the correct replacement part, price it in writing before any work starts, and have it installed by a background-checked technician. Most Therma-Tru-compatible roofing repairs in Orlando run between $400 and $1,800 installed, depending on the extent of the damage and the specific component. You’ll typically find us on this job within a few days of your call. Owners usually discover the problem the hard way: a water stain on the ceiling after an afternoon thunderstorm, a shingle in the yard after a wind event, or daylight visible through the roof deck during an attic inspection.
A quick word on who we are: Sawyer Remodel Orlando is an independent service provider, not a Therma-Tru dealer or corporate affiliate. That matters because we’re free to tell you exactly which parts will work, which ones are worth the money, and which ones aren’t, without toeing a company line.
Which Therma-Tru Models This Applies To
Therma-Tru’s roofing product line runs narrower than their door lineup, but the compatibility issue is real and worth understanding before you spend a dollar. Their roofing components, primarily ridge vents, flashing kits, and roof-integrated trim systems, are engineered to pair with specific Therma-Tru door and skylight installations, not as standalone roofing systems. The single most common issue we see in Orlando is a failed Therma-Tru integrated flashing system around a skylight or roof-access hatch, where the original installer used a generic substitute instead of the model-matched Therma-Tru flashing kit.
Here’s the practical part: find the model number. Therma-Tru stamps or labels their roofing components with a series code, usually on the underside of the flashing flange or on the original packaging. If the label is gone, measure the rough opening and the flange width, because Therma-Tru flashing kits come in dimensional increments that don’t match the aftermarket stuff at the big-box stores. For most Orlando homes built since the early 2000s, a quality aftermarket flashing system will do the job, but if you have an integrated vent-and-flashing assembly, go OEM. The aftermarket versions we’ve tested don’t seat correctly on the Therma-Tru collar profile, and Central Florida rain will find that gap within a season.
Styles & brands we work with
Signs Your Therma-Tru Roofing Is Failing
- Water staining at the ceiling corners of skylights or roof hatches. This almost always traces back to a failed flashing seal, not the roofing material itself. Therma-Tru flashing relies on a compression gasket that degrades in Florida’s UV-heavy sun, and once that gasket goes, every storm pushes water into the deck.
- Granules collecting in gutters or downspout elbows. This indicates the shingle surface surrounding a Therma-Tru integrated vent is reaching the end of its service life. Orlando’s heat accelerates granule loss, and we often see it concentrated on south-facing roof planes first.
- Visible daylight at the ridge vent from inside the attic. A properly functioning ridge vent should show no visible gaps. If you can see light, the baffle has failed or the vent was never seated correctly, which means hot-humid attic air isn’t venting and your AC bill is paying for it.
- Rust or corrosion on exposed flashing flanges. Therma-Tru’s galvanized flashing holds up reasonably well, but salt air near the coast and Orlando’s humidity combine to break down the coating faster than in drier climates. Once the galvanization fails, the steel underneath starts pitting within a year.
- Unexplained attic moisture or mildew near roof penetrations. This is the slow kill, not the dramatic leak. A small flashing gap lets humid Orlando air into the attic every day, and over time that shows up as dark spots on the decking or insulation.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Therma-Tru-compatible roofing repair in Orlando, plan on $400 to $1,800 installed. A straightforward flashing replacement around a skylight or roof hatch typically lands in the $400 to $900 range including parts, labor, and sealant. If the water damage has reached the roof deck and we need to replace decking, repair rafters, or re-shingle the surrounding roof plane, that pushes the job into the $900 to $1,800 range, or higher if the damage is extensive and ties into a full roof replacement, which runs $8,000 to $20,000 in this market.
Here’s what you get with us, and this is the part other contractors gloss over: a written price before any work starts, not a verbal estimate that changes at the invoice. The number you approve is the number you pay. The line item separates parts, labor, and disposal, so you see exactly what the Therma-Tru component costs and where the money goes. Every repair carries our 365-Day Done Right Promise, which means if it leaks again within a year, we come back and make it right at no charge. No argument, no prorated nonsense.
DIY or Call Us?
Here’s the honest split. You can safely inspect from inside: check your attic for daylight, look for water stains, and photograph anything suspicious before calling. That information helps us quote faster and more accurately. What you should not do is get on an Orlando roof in July to reseal flashing yourself. The heat makes sealants cure incorrectly, the roof surface is dangerously hot, and a fall from even a single-story roof changes a $600 repair into a hospital bill. Luca Romano, our owner and lead contractor, has watched enough DIY flashing attempts fail in College Park bungalows to know that roof work is not the place to learn on the job.
If you have a failing Therma-Tru roofing component, call (850) 809-0306. We’ll schedule a free inspection, identify the exact part you need, and hand you a written price before any work begins. Good work doesn’t need a speech, it just needs to hold up.
FAQs
Most Therma-Tru flashing and vent assemblies last 10 to 15 years in Central Florida’s climate, which is shorter than the national average because UV exposure and humidity break down the gaskets and sealants faster. Call (850) 809-0306 for a free inspection, and we’ll tell you exactly how much life is left in yours.
Small flashing gaps can sometimes be resealed if the underlying metal and gasket are intact, but in our experience, once a Therma-Tru compression gasket fails, resealing is a temporary fix that lasts a season or two at best, and most Orlando homeowners end up replacing the assembly anyway. Call (850) 809-0306 and we’ll give you the straight answer on your specific roof.
Most flashing and vent replacements take one crew a half day to a full day, depending on roof access and the condition of the surrounding decking. If decking replacement is needed, expect the job to run a second day. Call (850) 809-0306 for a timeline on your project, and we’ll include it in writing.
We stock the most common Therma-Tru flashing kits and sealants on our trucks, along with quality aftermarket equivalents for full-size replacements, and we order OEM parts for unusual sizes or older series codes with a typical 3-to-5 business day lead time. Call (850) 809-0306 and we’ll check availability while you’re on the phone.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
