Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Fence Installation: The Orlando Owner’s Guide
Therma-Tru fence installation in Orlando typically runs $3,500 to $9,000 for a complete perimeter job, with most mid-sized yards landing around $5,500 installed. We stock the common Therma-Tru post sleeves, rails, and pickets on the truck, so a failed section usually gets matched same-visit. The way most Orlando homeowners discover they need this work: a summer squall snaps a rail or a picket, or the neighbor’s fence crew backs a skid steer into a section. What starts as one cracked post sleeve usually means the surrounding sections have been quietly loosening for months.
Which Therma-Tru Models This Applies To
Therma-Tru doesn’t manufacture fence systems directly, but their composite and fiberglass trim lines get used heavily by Orlando fence contractors as structural rails, post wraps, and decorative caps alongside PVC and vinyl fence profiles. The gotcha we see constantly: homeowners order a generic 4×4 post sleeve without checking the actual post dimension. Therma-Tru’s wrapped post systems are sized for true 4×4 or 5×5 nominal lumber, which means a pressure-treated post that’s swelled in Florida humidity will not slide a sleeve on without planing. We measure the post in three places before ordering anything.
For aftermarket equivalents, quality PVC rail kits from brands like LMT and Westlake run $35 to $70 per 8-foot rail, while Therma-Tru-grade fiberglass trim caps run $3 to $6 per linear foot. OEM isn’t always the right call here; sometimes a better aftermarket bracket beats a decorative cap that was never designed for 60 mph wind-driven rain. We stock both and tell you which one we’d put on our own fence.
Styles & brands we work with
Signs Your Therma-Tru Fence Installation Is Failing
- Rails pulling out of post brackets. The screws backing out or the bracket itself flexing means the post is rotating in its footing. In Orlando’s sandy loam, this gets worse after every heavy rain, not better.
- Post sleeves bulging or splitting at the base. Trapped moisture inside the sleeve expands in the heat. Once you see a hairline crack at the bottom corner, water is already sitting against the post.
- Pickets warping or twisting. PVC and composite move a lot in central Florida’s sun-to-rain cycles. A bowed picket doesn’t just look bad, it’s putting lateral stress on the rails that hold it.
- Gate drag or latch misalignment. The most common cause here isn’t the hinges, it’s the post assembly settling. Shim it and it’ll re-sink within a season; the post needs to be reset or the hinge side reinforced.
- White chalky residue on rails. That’s PVC degradation from UV exposure. It’s cosmetic at first, but it means the surface has lost its protective layer and the material below is next.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, a single-section fence repair with Therma-Tru-compatible components runs $350 to $900, while a full perimeter installation on a standard city lot falls in the $3,500 to $9,000 range depending on linear footage, post spacing, gate hardware, and whether we’re replacing footings or working with existing ones. Every quote includes the parts, labor, debris haul-away, and a written price before the first tool comes out.
We don’t do change orders mid-job. If we find a rotted post or a footing that needs re-pouring, that’s covered in the scope conversation before we start, not a surprise line item at the end.
Every Therma-Tru-compatible fence installation we do in Orlando carries Sawyer Remodel Orlando’s 365-Day Done Right Promise. If a rail splits or a gate latch misaligns within that year, we come back and make it right, in writing, no argument.
DIY or Call Us?
You can check a few things yourself: confirm the actual post dimensions with a tape measure, inspect the brackets for cracks, and note whether the gate is dragging on the latch side. That information saves us a trip. What we’d caution against is buying a stack of generic PVC components online without knowing the exact profile and depth. A rail that doesn’t seat fully into a bracket fails again within months, and a post sleeve that’s half an inch too tight turns a morning project into a sledgehammer situation.
If the job involves resetting posts, you’re pulling concrete and repouring footings. That’s the point where calling (850) 809-0306 saves you a weekend and a rental saw. We’ll come look, write up the scope, and give you a number before you commit to anything.
FAQs
A properly installed composite or PVC fence in Orlando lasts 20 to 30 years, but the bracket hardware and post footings typically need service around year 10 to 12. Call (850) 809-0306 and we’ll inspect your setup and tell you what’s actually left in it.
Yes, and that’s what we do most often. A failed rail, bracket, or post sleeve gets swapped without touching the rest of the fence, typically in a half-day visit.
A section repair is done in one visit, usually 3 to 5 hours. A full fence install on a standard Orlando lot runs 2 to 3 days depending on post spacing and gate count. Call (850) 809-0306 for a timeline on your specific yard.
We keep common Therma-Tru post sleeves, rails, and brackets in the truck for fast matching, along with quality aftermarket equivalents we trust. Luca Romano and his crew also install parts for KraftMaid, Cambria, and Silestone projects, so we’re used to matching factory specs across brands.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
