Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Orlando Owner’s Guide
Ameristar kitchen remodeling in Orlando typically runs $14,000 to $45,000 as a full-gut project, and that includes the cabinet lines, countertops, backsplash, and the structural work that makes it all hold up. When a homeowner calls us about an Ameristar component that’s failing, it’s usually the cabinet faces or drawer glides that gave out first, not the boxes themselves. The good news: we carry the replacement parts and matching materials on our trucks, so you won’t wait weeks for a fix. If you’re seeing doors that won’t close square, laminate peeling at the edges, or drawer slides that grind no matter how much you adjust them, you’re in the right place.
We are Sawyer Remodel Orlando, an independent remodeling contractor serving Orlando and Central Florida. We are not affiliated with Ameristar, but we work on their kitchens every week, know how their materials age in Florida humidity, and stock the parts that matter.
Key Takeaways:
- Ameristar kitchen components in Orlando fail most often at hinges, drawer glides, and door faces, usually from humidity cycles
- Full Ameristar kitchen replacement runs $14,000 – $45,000; targeted part repair is far less
- We match OEM specs or install quality aftermarket parts with the same warranty
- We stock cabinet hardware, drawer slides, and door hinges on our service trucks
Which Ameristar Models This Applies To
Ameristar’s kitchen lines vary by build year and housing development. In Orlando, we see Ameristar kitchens most often in homes built between 2005 and 2018, especially in subdivisions across College Park, Baldwin Park, and Dr. Phillips. If your kitchen has flat-panel doors with a stain or paint-grade finish and soft-close hardware that’s given up the ghost, that’s the classic Ameristar build. The trick is identifying which cabinet series you have before ordering parts. Check the inside of the sink cabinet door. Ameristar typically stamps a four-character series code there, plus a date of manufacture. That code tells us whether you’re on a standard overlay, full overlay, or inset hinge pattern, which matters because the hole spacing on replacement doors and drawer fronts is not universal.
OEM Ameristar parts are solid, but they’re priced like OEM parts. For hinges and drawer glides, we typically recommend quality aftermarket equivalents from Blum or Grass, the same hardware behind plenty of higher-end kitchens. The important thing is matching the overlay measurement, not buying a generic hinge. A 1/2-inch overlay hinge on a 3/4-inch overlay cabinet will leave doors riding proud or binding at the corners. We measure that on site before quoting anything.
We also stock parts for KraftMaid, Cambria, and Silestone kitchens, so if your Ameristar home has a mix of cabinet brands, we can match hardware across the whole room.
Styles & brands we work with
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors not closing square or catching at the corners. This usually means the hinge screws have stripped out of the particleboard face frames, common in Orlando because the humidity expands the board and loosens the threads. The fix is often a hinge plate with new screw patterns, not a new door.
- Drawers that grind, stick, or sag on one side. Ameristar drawer glides have a plastic roller wheel that cracks after years of humidity cycling. One cracked wheel throws the whole drawer out of alignment, even if the glide metal looks fine.
- Laminate peeling at the top edge of drawer fronts or door bottoms. Florida kitchens get hit with direct sun and wet hands at the same spot, every day, for years. The adhesive gives out there first. That’s a replace-the-front job, not a glue-it-back fix.
- Soft-close mechanisms making a popping sound, then slamming hard. The hydraulic piston inside the hinge cup has failed. This is the most common Ameristar failure we replace in Orlando, and it’s a ten-minute-per-door repair if you have the right piston.
- Microwave vent hood or under-cabinet lighting shorting or flickering. These were builder-installed in many Ameristar kitchens, and the wiring connections sit inside the cabinet void where grease vapor builds up over time. We see corrosion at the wire nuts more than actual device failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what you’re paying for in Orlando, and it’s a written price before we touch a tool:
| Scope | Installed Price Range |
|---|---|
| Full Ameristar kitchen remodel (gut, new cabinets, counters, backsplash) | $14,000 – $45,000 |
| Cabinet replacement only | $4,000 – $13,000 |
| Countertop replacement | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Targeted part repair (hinges, glides, drawer fronts) | $150 – $900 |
Where you land in that range depends on cabinet count, whether you’re keeping the existing footprint or moving plumbing, and what countertop material you choose. All of it gets a written line-item quote before work starts, the number on the invoice is the number you approved, and our 365-Day Done Right Promise covers the install for a full year. If your Ameristar drawer glide fails again inside that window, we fix it without a second invoice.
DIY or Call Us?
Ameristar cabinet hardware is one of the safer things to work on in a kitchen, provided you’re replacing hinges or glides that are already failing. If you’re handy, you can check the series code on the sink cabinet door, count your overlay measurement, and order matching hardware. The danger zone is anything electrical: under-cabinet lighting, microwave vent hoods, or any wiring inside the cabinet void. Grease vapor and house voltage are a bad combination. If you’re opening a junction box in a kitchen cabinet and you’re not a licensed electrician, stop there.
What we see go wrong with DIY on Ameristar kitchens is usually a measurement miss. Somebody orders a drawer glide that’s an inch too long or a hinge with the wrong overlay, installs it anyway, and the door hangs crooked forever. If you’d rather not spend a weekend measuring and remeasuring, call (850) 809-0306 and we’ll quote the exact repair with the part number in writing.
FAQs
Ameristar cabinets in Orlando typically last 12 to 20 years on the boxes, with door fronts and hardware needing attention around year 8 to 12 depending on kitchen ventilation and humidity exposure. The boxes rarely fail; the moving parts and laminate edges go first. Call (850) 809-0306 and we’ll tell you whether you’re looking at a repair or a replacement.
Yes, in most cases the existing cabinet boxes are sound and the kitchen only needs new door fronts, drawer glides, hinges, or a fresh countertop and backsplash. Full replacement is really only necessary when water damage has reached the cabinet boxes or you’re changing the whole layout. A site visit costs you nothing and we’ll tell you straight which way to go.
Most hinge, glide, and drawer front replacements take one to three hours on site, assuming we’ve matched the parts ahead of time from your series code and measurements. If we have the part in stock on the truck, we can often handle it the same visit. Full kitchen replacement runs four to eight weeks depending on cabinet lead times and countertop fabrication.
We stock hinges, drawer glides, soft-close pistons, and standard door pull hardware that matches Ameristar specs, and we can order OEM Ameristar door fronts with a one-to-two-week lead time. If we have your part on the truck, you’ll know before we arrive. Call (850) 809-0306 with your series code and we’ll check inventory right then.
Good work doesn’t need a speech, it just needs to hold up. If your Ameristar kitchen is failing, call (850) 809-0306 for a free estimate on parts or a full remodel. We write the price down before we pick up a tool, and we stand behind it for a year after we’re done. Sawyer Remodel Orlando serves all of Orlando and nearby areas, with live arrival time tracking, photo updates, and a written price on every single job. Ask for Luca when you call.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
