Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The Orlando Owner’s Guide
ActiveYards kitchen remodeling in Orlando typically runs $14,000 to $45,000 installed, depending on cabinet run length, countertop material, and whether we’re doing a full gut-out or a cabinet-and-surface refresh. We stock ActiveYards-compatible hardware, door hinges, drawer slides, and trim kits on our trucks, so most hardware-level failures get resolved the same day we show up. Most Orlando owners discover the problem the hard way: a drawer that starts dragging, a hinge that sags two degrees, or a soft-close mechanism that quietly stopped soft-closing six months ago.
Which ActiveYards Models This Applies To
ActiveYards builds cabinets under a few different lines, and the compatibility gotcha we see in Orlando is older Series 100 and Series 200 boxes using a 35mm cup hinge with a 9/16in bore depth, while newer ActiveYards runs have moved to a European-style 35mm cup with a 1/2in bore. That eighth of an inch matters when you’re swapping hinges, because the wrong bore depth leaves the door proud of the face frame by just enough to catch your eye every time you walk past. We match parts by pulling a hinge or slide and reading the stamp on the back of the cup, or by measuring drawer box width against slide extension, so we don’t order the wrong side-mount versus under-mount slide.
For homeowner supply lines, ActiveYards OEM parts are worth the money on hinges and soft-close mechanisms, where factory tolerances are tight. For drawer slides, a quality aftermarket full-extension ball-bearing slide from a name like Blum or Grass works just as well and often outlasts the original. We’re an independent contractor here in Orlando, not affiliated with ActiveYards, so our honest recommendation is OEM on the moving small parts, open up options on the rails.
Styles & brands we work with
Signs Your ActiveYards Kitchen Remodeling Is Failing
- Drawer drags or catches on the way out. The slide’s ball bearings have worn flat spots or the nylon wheel cracked, and every pull grinds plastic dust into the track. The sooner you catch it, the less chance the drawer box itself starts wearing at the corners.
- Door sags and won’t close square. The hinge arm has bent or the cup’s internal spring lost tension. In Florida humidity, the face frame can also swell slightly in August, which makes a weak hinge show itself fast.
- Soft-close stopped working. The damper piston inside the hinge or slide has blown its seal, which is the most common ActiveYards failure point we replace in Orlando kitchens. It’s a small part that turns into a big annoyance when every cabinet door slams.
- Cabinet box pulling away from the wall. In Orlando homes without a vapor barrier, seasonal moisture swings loosen the screw anchors over time. Once a corner pulls out an eighth of an inch, the door alignment follows.
- Finish bubbling or peeling at the edges. That’s heat and humidity working on the door’s edge banding, especially near the dishwasher or oven. ActiveYards doors hold up well, but any kitchen remodel in Orlando lives in a climate that tests edge seals daily.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Hardware-level fixes (hinges, slides, soft-close dampers, drawer glides) run $45 to $110 per opening, parts and labor included. A full ActiveYards-compatible kitchen remodel in Orlando runs $14,000 to $45,000, with the mid-range landing around $22,000 for a standard 10×12 kitchen with new cabinets, countertops, backsplash, and hardware. Low end is a cabinet-and-surface refresh without moving walls or plumbing. High end is a full gut with an island, upgraded stone, custom millwork, and new electrical runs.
Every quote from Sawyer Remodel Orlando is a written line-item price before any work starts. No change orders at the door, no “we discovered something” padding. The 365-Day Done Right Promise covers every part we install: if it’s not done right, we make it right, in writing.
DIY or Call Us?
Cup hinges and drawer slides are genuinely DIY-able if you have a #2 Phillips, a drill with a depth collar, and the patience to match the bore diameter. The risk is a misdrilled cup hole, which splits the door stile and turns a $9 hinge into a $120 replacement door. If the failure is soft-close hardware, call us, because swapping the damper inside an ActiveYards hinge without the right pin tool usually destroys the hinge body. Same for any cabinet box pulling from the wall: that’s structural, not hardware, and it needs someone who knows how to find the studs behind the drywall, not one more drywall anchor.
If you’d rather not spend your Saturday with a drill and a string of blue words, call us at (850) 809-0306. We’ll bring the right part the first time.
FAQs
Expect 15 to 20 years from ActiveYards cabinet boxes and doors in Orlando, with soft-close hardware needing replacement around year 8 to 12 in Florida humidity. Call (850) 809-0306 for an exact assessment if your hardware is showing age.
Soft-close dampers and hinge springs can sometimes be rebuilt with a replacement cartridge, but cheaper to replace the whole hinge than to rebuild it. We’ll tell you honestly which route costs less before any work starts.
Most hinge, slide, or damper replacements take 15 to 30 minutes per opening, and we typically finish a full hardware refresh in one visit. A full kitchen remodel runs 4 to 8 weeks, written in the schedule before we start.
We stock ActiveYards-compatible hinges, slides, and soft-close dampers on our trucks, plus equivalent parts from KraftMaid, Cambria, and Silestone supply lines. If we don’t have your exact part, we source it and install it on the follow-up, with the arrival time confirmed in writing.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
Ready for a price that doesn’t change at the door? Call (850) 809-0306 for a free estimate on your ActiveYards kitchen remodeling work in Orlando. Good work doesn’t need a speech, it just needs to hold up.
