







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Bathroom Remodeling: The Orlando Owner’s Guide
An ActiveYards bathroom remodel in Orlando typically runs $9,000 to $28,000 installed, depending on the size of the space, the scope of the plumbing changes, and whether you’re keeping the existing footprint or moving walls. We stock and install ActiveYards-compatible bathroom components and fixtures, and most full remodels in the Orlando market take two to four weeks from demo to final walkthrough. Most Orlando homeowners call us after years of dealing with a bathroom that works but doesn’t work well: failing caulk lines, a shower valve that drips, a vanity that’s water-swollen at the base, or tile that’s cracked along the pan. They know it’s time, but they want a real number before they commit, and they want to know the work will hold up in Florida humidity.
Which ActiveYards Models This Applies To

ActiveYards doesn’t manufacture bathroom fixtures directly, so what you’re really dealing with is a bathroom that was either built with ActiveYards-adjacent modular components or one where ActiveYards outdoor structures share wall lines with your bathroom. We see this most in Orlando homes that added an ActiveYards pergola or pavilion to the back of a primary bath, where the roofline meets the exterior wall and the waterproofing details between the two structures start to matter. If you’ve got an ActiveYards structure tied to your bathroom’s exterior wall, the flashing, weep screeds, and tie-in points are where failures begin. For the remodel itself, we match your rough-in spacing, drain location, and subfloor condition to the right spec. The key gotcha in Orlando: slab foundations. Half the bathrooms we remodel sit on a concrete slab, which means moving a drain isn’t a quick fix. Before you fall in love with a layout change, we verify what the slab will allow, because cutting into it changes the job cost fast.
One compatibility note worth knowing: ActiveYards structures are engineered for outdoor exposure, but the fasteners and flashing at the house connection are the same ones that fail first on any exterior-to-interior transition. When we remodel a bathroom tied to an ActiveYards structure, we inspect that seam. If the original install skipped the right flashing or caulk, you’ll see water staining on the interior wall before you see it anywhere outside. We’re an independent Orlando contractor, not affiliated with ActiveYards, so our job is to tell you what’s actually failing and fix it without brand blinders.
Styles & brands we work with







Signs Your ActiveYards Bathroom Remodeling Is Failing
- Caulk that won’t stay sealed at the wall-to-pan joint. This is almost always a sign the shower pan or tub is flexing under weight, which means the subfloor or the pan itself has lost support. Caulk fails repeatedly when the gap keeps moving.
- Tile that sounds hollow when you tap it. Hollow tile means the thinset bond has broken. In Orlando’s humidity cycle, that bond fails faster when the waterproofing behind the tile was never done to spec, and water gets trapped.
- A shower valve that drips after you’ve replaced the cartridge twice. The cartridge isn’t the problem. The valve body is worn or the water pressure in your Orlando neighborhood is spiking. Replacing the valve body is a plumbing job, not a parts swap.
- Water staining on the drywall below the bathroom, in the same spot, no matter how much you caulk above. That’s a plumbing leak behind the wall or a failing pan liner, not a surface issue. The stain will return until the real source is opened up.
- Baseboards swollen at the corners of the vanity or around the toilet flange. Slow, low-volume leaks from a wax ring or a supply line do this over months. You don’t see water, but the wood tells you it’s been there.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the pricing picture for an ActiveYards-adjacent bathroom remodel in Orlando right now, broken down by scope:
- Small bathroom remodel (under 40 sq ft, same footprint): $5,000 – $12,000
- Primary bath remodel (new shower, vanity, toilet, flooring, lighting): $9,000 – $20,000
- Full bathroom gut with layout changes and plumbing relocation: $15,000 – $28,000
- Walk-in shower replacement only: $4,500 – $12,000
What drives the range in Orlando specifically: slab foundation work, cast-iron drain pipe replacement (common in homes built before the 1980s), and whether your ActiveYards structure tie-in needs re-flashing. Every estimate we write is a line-item price in writing before any work starts, and the number on the invoice is the number you approved. We don’t do change orders mid-job unless you change your mind about something. The workmanship is covered under our 365-Day Done Right Promise: if it’s not done right, we make it right, in writing, on every project.
DIY or Call Us?
Some of this you can check yourself without calling anyone. Look at your caulk joints. Try to lift a floor tile near the shower pan with a putty knife. Look under the vanity with a flashlight for water staining on the cabinet base. Those are safe, smart inspections. What we’d tell you not to do yourself: anything that involves cutting into a wall that might contain plumbing, moving a drain on slab, or re-flashing an exterior tie-in. The risk in Orlando isn’t just the work, it’s the water. A wrong waterproofing detail behind tile in our climate shows up as mold inside a wall, and by the time you see it, the framing repair costs more than the remodel did. If you’ve got an ActiveYards structure tied to that bathroom wall, call us before the wall comes apart. Good work doesn’t need a speech, it just needs to hold up. Call (850) 809-0306 and we’ll tell you what you’ve got.
FAQs

A properly built bathroom remodel in Orlando lasts 15 to 25 years before it needs cosmetic updates, with the shower pan and valve body being the components most likely to need attention around the 10-year mark due to our hard water and humidity cycles. If the waterproofing was done right, the tile and structural work outlast the fixtures.
In many cases yes, if the failure is isolated to a single component like a shower valve, a pan liner, or a failing caulk joint. If water has been getting behind the wall, a repair turns into a remodel quickly, and we’ll show you what we found before we recommend spending more.
Most Orlando bathroom remodels take two to four weeks from demo to final walkthrough, with slab plumbing work adding a few days and custom tile work adding a week or more depending on the layout.
We stock common replacement parts for ActiveYards-adjacent bathroom work including pan liners, valve cartridges, flange kits, and framing hardware on the truck, and we can order ActiveYards-compatible components same-week through our local Orlando suppliers when the exact spec isn’t something we keep on hand.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.


