Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The Orlando Owner’s Guide
If an ActiveYards window or door on your Orlando home has failed, you’re probably looking at a replacement that runs between $4,500 and $25,000 installed depending on how many units you’re swapping and whether they’re standard windows or impact-rated doors. Most owners discover the problem the hard way: a window that won’t lock, a door that drags against the frame, or condensation fogging up between the glass panes. We stock ActiveYards-compatible hardware and glass packs on our service trucks, and we’ll give you a written price before any work starts.
ActiveYards builds aluminum-frame windows and doors designed for screened porches, lanais, and pool enclosures, which means Orlando’s humidity and afternoon thunderstorms put real stress on the seals, rollers, and locking hardware. In neighborhoods like College Park and Winter Park where older homes have original lanai enclosures, we regularly see ActiveYards door rollers that grind to a halt after years of grit and moisture working into the tracks. The good news is most of these parts can be swapped without replacing the entire frame, which keeps the price down and the job quick.
Key Takeaways:
- ActiveYards parts we commonly replace include door rollers, latch sets, glass panels, and sill sweeps.
- Installed replacement costs in Orlando typically run $4,500 to $25,000 for full window or door units, with individual hardware repairs starting much lower.
- We’re an independent local contractor, not affiliated with ActiveYards, but we work with their hardware and frame specs daily.
- Every quote includes a written price before work starts, no surprises on the invoice.
How much does it cost to replace ActiveYards windows and doors in Orlando?
Full replacement of ActiveYards windows and doors in Orlando runs $4,500 to $25,000 installed depending on the number of openings, whether you’re upgrading to impact-rated glass, and how much framing repair the existing lanai or enclosure needs. A basic hardware swap like a door roller or latch set usually costs far less than a full unit replacement. We’ll break out the parts cost and the labor cost separately so you can see exactly what you’re paying for, and our 365-Day Done Right Promise covers the workmanship in writing.
| ActiveYards Repair / Replacement | Typical Orlando Price Range |
|---|---|
| Door roller replacement (per door) | $85 – $250 |
| Latch set / locking hardware replacement | $60 – $180 |
| Window glass pack replacement (per panel) | $150 – $450 |
| ActiveYards window replacement (full unit) | $4,500 – $15,000 (project-based) |
| Impact window & door installation | $8,000 – $25,000 (project-based) |
Those prices reflect what we’re actually charging in Orlando right now, not a national average you’d find on some generic home improvement site. Door hardware replacement is usually a quick job that costs under $300, while a full window replacement on an older home in College Park or Thornton Park can cost more because framing and trim work often need attention too. We also stock compatible hardware for KraftMaid, Cambria, and Silestone products, so if you’re replacing ActiveYards parts alongside a cabinet or countertop refresh, we can bundle the work and save you a second trip.
Styles & brands we work with
Which ActiveYards Models This Applies To
ActiveYards window and door frames are built around aluminum extrusions that have evolved through several series lines over the years, and not every replacement roller or latch crosses between them. The most common ActiveYards series we service in Orlando includes their standard lanai sliders, single-hung windows, and their storm-rated door systems, and each one uses a slightly different roller geometry. The model label is usually stamped on the inside edge of the door frame near the header or on the top rail of a window, and if you can snap a photo of that label, our parts team can identify it in under a minute.
Here’s the compatibility gotcha most homeowners run into: ActiveYards changed the roller housing width on their newer series by about an eighth of an inch, so an older roller won’t seat properly in a newer track and vice versa. We carry both sizes on the truck. When we quote an ActiveYards window or door replacement in Orlando, we’ll match the hardware to the stamped series code, not just eyeball it, because a roller that’s close enough on Tuesday is a door that grinds to a stop on Friday.
OEM ActiveYards parts are the safe default, especially for anything that touches the frame or needs to maintain a weather seal. For hardware like rollers and latch sets, quality aftermarket parts from the same suppliers that make ActiveYards components can work just as well and cost less, but we’ll tell you upfront whether we’re quoting OEM or equivalent and why. Glass packs for ActiveYards windows are one area where we insist on OEM or manufacturer-certified glass, because the silicone seal recipe matters in Orlando’s humidity and an aftermarket glass pack that fogs up in a year is a false economy.
Signs Your ActiveYards Windows & Doors Is Failing
- Door drags or requires a lift to slide. The roller bearings have worn flat or the track has collected enough Florida grit that the roller can’t pivot cleanly. Pushing harder just grinds the track and makes replacement more expensive later.
- Window or door won’t lock without slamming it. The latch bolt and keep have shifted out of alignment, usually because the frame has settled or the rollers sagged.
- Condensation or fog between the glass panes. The seal on your ActiveYards insulated glass pack has failed, and Orlando’s humidity is now inside the unit. There’s no field fix; the glass pack gets replaced.
- Water marking or soft wood on the sill below a window. The exterior weep holes are clogged or the perimeter seal has pulled away, sending rainwater into the opening instead of out through the designed channels. If you can see water stains below your ActiveYards window, the leak has already started.
- Visible corrosion or white powder on aluminum frames. Aluminum frames in Orlando have to withstand constant atmospheric salt, chlorine from pools, and sunscreen oils. Pitting or flaking means the powder coating is compromised, and that area will fail next.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Every ActiveYards windows and doors replacement quote in Orlando includes the specific part or glass pack, the labor to remove the old one and set the new one, and cleanup of the work area. We give you the price in writing before we touch the job, so the number you approve is the number you pay. For full window or door replacements, we’ll also check the surrounding framing and tell you if any repair work is needed before the new unit goes in, because a new window in a rotted opening is still a leak.
What drives the range upward? Impact-rated glass is the biggest jump, especially for doors. Full frame replacements cost more than pocket replacements, and older lanai enclosures in neighborhoods like Delaney Park or Audubon Park frequently need track rebuilds to accept the new hardware. On the low end, a simple roller and latch swap on a single slider can be a same-day fix for under $300. On the high end, a full lanai door and window rebuild with impact glass can run into the teens and above.
We include a written guarantee on every repair, and our 365-Day Done Right Promise means if the part or the workmanship fails within a year, we make it right under the terms we put in writing. If a repair fails, your second visit is free. We don’t make you call a warranty department or file a claim to get us back out; you call the same number you called the first time.
DIY or Call Us?
You can safely check a few things yourself: look at the model label and photograph it, test whether the door lifts by a quarter inch when you pull up on the handle, and listen for a grinding sound when you slide it. Those observations help us quote accurately over the phone. What you shouldn’t try is pulling the door off its track to access the rollers. ActiveYards slider panels are heavier than they look, and a panel that pins a hand against an aluminum track is a trip to the ER. Even with two people and the right lift technique, if the panel twists while you’re working the roller out, you can crack the glass or bend the frame.
Glass pack replacement on an ActiveYards window or door is another job that needs a shop. The new pack has to be set into the frame with the right amount of sealant at the right temperature, or it’ll fog in Orlando’s humidity within the first year. We’ve fixed enough homeowner attempts to know that the money saved on a DIY glass pack evaporates when the first tropical storm shows you where the seal failed. Call (850) 809-0306, and we’ll come out, look at the frame series, and give you a written quote before anything gets touched.
FAQs
ActiveYards aluminum frames typically last 20 to 25 years in Orlando’s climate, but the rollers, seals, and hardware usually need replacement every 5 to 10 years depending on sun exposure and proximity to salt or pool chemicals. Coastal neighborhoods like Baldwin Park with heavier salt air will see hardware fail sooner than inland areas. Call (850) 809-0306 for a free estimate if your hardware is reaching that age.
Yes, most ActiveYards failures in Orlando are hardware issues that can be repaired by replacing rollers, latches, or glass packs rather than the full unit. Frame corrosion or severe track damage is usually the point where replacement makes more sense. Call (850) 809-0306 and we’ll tell you honestly which route saves you money.
Most ActiveYards door hardware swaps in Orlando take under two hours from arrival to cleanup, and glass pack replacements typically take half a day. Full window or door replacements can run one to three days depending on how many openings and the condition of the surrounding framing. We’ll give you a time estimate in writing with your quote, and our Relay Visibility Guarantee means you’ll see live arrival times and photo updates before and after the work.
We stock ActiveYards-compatible rollers, latch sets, and common glass pack sizes on our service trucks, which means most same-day repairs don’t wait for shipping. For less common ActiveYards series or impact-rated glass packs, we order the part and schedule the install once it arrives. Call (850) 809-0306 and we’ll check our truck stock while you’re on the line.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
