A Sawyer company - serving Orlando, FL
An open living room and dining area after a whole-home remodel

Techo-Bloc Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Orlando
A remodeled family room with new windows and a window seat
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Techo-Bloc Fence Installation: The Orlando Owner’s Guide

Techo-Bloc fence installation in Orlando typically runs $3,500 to $9,000 for a standard residential run, with the final number tied to linear footage, post depth, and whether we’re replacing an existing fence or starting fresh. We stock Techo-Bloc-compatible posts, panels, and cap pieces on our trucks, which means most fence installs in Orlando are completed in one to two days once materials are confirmed. Most homeowners call us after a storm has shoved a panel out of alignment or the sandy soil under College Park or Winter Park has let a post lean just enough to notice from the curb. The fence still looks fine from ten feet away, but up close you can see daylight where the panel used to seat flush against the post.

Call (850) 809-0306

Here’s the thing about a Techo-Bloc fence: it’s a modular system, not a poured-in-place wall. So when one section fails, you don’t have to tear out the whole run. You need someone who knows which generation of Techo-Bloc block you have, whether the tongue-and-groove will match, and how deep to set the post in Florida soil so it doesn’t walk the same way next hurricane season.

Which Techo-Bloc Models This Applies To

A remodeled living room with built-in shelves around the fireplace

Most Techo-Bloc fence installs we see in Orlando use either the Blu 60, Raffinato, or Estate wall and post systems, though we also field calls for the Semma fence block and the smaller Mista garden wall units. Each system uses a different post-to-panel connection: the Blu 60 locks with a cast-in slot that accepts a matching panel, while Raffinato posts have a narrower channel that only takes Raffinato-compatible cap and panel pieces. A Blu 60 panel will not seat properly in a Raffinato post, no matter how much you shave it. That’s the compatibility gotcha that costs people money when they buy the wrong piece online.

Here’s what to look for if you’re not sure what you have: the block face itself. Blu 60 has a visible 60mm chamfer on the front edge and a smoother, more contemporary face. Raffinato has a split-texture surface with a more rugged, quarried look. Estate is larger in scale, with a broader post and heavier cap. If you can’t find a stamp, measure the post channel width. Blu 60 sits at roughly 60mm; Raffinato runs narrower. When in doubt, take a photo of the block face and text it to us. We’ll match it before any price goes in writing.

On the OEM versus aftermarket question: for Techo-Bloc specifically, we always recommend OEM panels and caps when they’re available. The aggregate blend and color consistency for Techo-Bloc runs tight from batch to batch, and a quality aftermarket block from a no-name supplier often looks like a patch job from across the yard. That said, for structural posts below grade, a properly specified concrete footing with the right depth and rebar matters more than whose logo is on the block. We’re not affiliated with Techo-Bloc, but we’ve installed enough of their product in Orlando to know what it should look like when it’s done right.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Techo-Bloc Fence Installation Is Failing

  • Post lean from the base. This almost always traces back to a footing that wasn’t dug deep enough. Orlando’s sandy soil drains fast, which sounds great until a heavy rain washes the fines out from under a shallow footing and the whole post settles. We see this most often in newer subdivisions around Lake Nona where the fill dirt was never properly compacted.
  • Panel sliding out of the post channel. Wind load from an afternoon thunderstorm can jar a panel loose if the channel wasn’t shimmed tight during install. It’s not just cosmetic; a half-seated panel lets water sit in the channel, and standing water is what kills the connection over time.
  • Cracked cap or cap adhesive failing. Florida UV exposure breaks down construction adhesive faster than anything else. Caps that were glued instead of mechanically fastened start lifting after three to five Orlando summers.
  • Color fading that’s uneven across the run. If one section is noticeably lighter, it usually means a prior repair used a different production batch. Techo-Bloc blends are good, not magic. We match as close as possible and then adjust the layout so any variation hides against the natural light line.
  • Visible rust staining below post caps. That’s water has been sitting inside a hollow post and finding its way out through the joint. Downspout proximity and poor cap drainage are the usual culprits. Left alone, the rust stain spreads and the freeze-thaw cycle, rare as it is here, does the rest of the damage.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A whole-home remodel with the living, dining and kitchen areas opened up

For an Orlando Techo-Bloc fence install, you’re looking at $3,500 to $9,000 for a typical residential run of 40 to 80 linear feet. That includes demolition of the existing fence, new concrete footings at the proper depth for Florida soil, all block and panel material, caps, shims, and cleanup. On the low end, a shorter run with simple geometry and easy access comes in closer to $3,500. On the higher end, longer runs, tighter access, or any situation where we’re hand-carrying material through a side gate in Baldwin Park pushes the number up.

What drives the price within that range: linear footage (obviously), post count, whether existing footings need to be broken out and re-poured, and whether the ground slopes. A fence running down a slope in Thornton Park costs more than a flat run because every post height has to be calculated independently. Every quote we give for Techo-Bloc fence installation in Orlando is a written line-item price before any work starts. You’ll see the block cost, the labor, the footing cost, and the haul-away fee all separated. The number you approve is the number on the invoice. And every install carries our 365-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

You can absolutely do your own homework before you call. Check which block style you have, measure the run, and if possible, dig down next to one post to see how deep the footing goes. That tells us a lot about why it failed in the first place. What you shouldn’t DIY: resetting a post. Getting the footing depth and plumb right requires a level, a string line, and a willingness to let concrete cure before you stack block on top. If you set a post a half-degree off plumb, by the time you’re eight feet up you’ve got a visible lean that will drive you crazy every time you pull into the driveway.

The other reason to call us: getting the right block matched. Order the wrong panel online and you’re stuck with 800 pounds of product you can’t return. Call (850) 809-0306 and we’ll come out, identify what you have, and give you a written price. You don’t have to commit that day. You just get a real number and a real plan.

FAQs

A built-in window seat in a bay window

Getting started with Sawyer in Orlando

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Orlando team

A local crew that works across Orlando and the towns around it, to the same written standard as every Sawyer location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Orlando? Licensed & insured · Free in-home estimates response · free estimates
Call (850) 809-0306
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Sawyer Remodel Orlando responds fast. No obligation.

By sending this request, you agree to the terms of our Privacy Policy and consent to receive communications by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch