Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Kitchen Remodeling: The Orlando Owner’s Guide
If you have ECO Window Systems windows in your Orlando kitchen and you’re planning a remodel, the window frames and flashing need to integrate correctly with new cabinets, counters, and backsplashes, or you’ll fight leaks and misalignment for years. At Sawyer Remodel Orlando, a full kitchen remodel involving ECO Window Systems windows typically runs $14,000 to $45,000 in the Orlando market, and the window-specific portion of that work hinges on getting the reveal, trim, and waterproofing right the first time. Most owners come to us after a previous contractor roughed in new drywall and left a half-inch gap above the window frame, or after water staining showed up at the sill corners following a backsplash install.
We’re an independent Orlando remodeling contractor, not a division of or dealer for ECO Window Systems. What that means for you: we install and work around your existing ECO windows without pushing a replacement you don’t need, and we match trim, extension jambs, and flashing to the actual extrusion profile on your frames, not whatever happens to be on the truck.
Key Takeaways
- Orlando kitchen remodels with ECO Window Systems integration run $14,000 – $45,000 depending on scope
- The window-to-counter and window-to-cabinet junction is where failed installs show up first, usually as water staining within 18 months
- We stock extension jambs and trim profiles sized for ECO frame depths common in Central Florida homes
- Every job includes a written price before work starts and the 365-Day Done Right Promise
Which ECO Window Systems Models This Applies To
ECO Window Systems produces both single-hung and fixed-picture units in a range of frame depths, and the model number matters more than most homeowners realize. Look on the inside edge of the frame, typically on the left or right vertical rail near the top: you’ll see a label with the series name and a set of dimensions. The most common units we work around in Orlando kitchens are the ECO 3000 and ECO 4000 series, which have different interior frame depths, so a trim kit that looks right on one will sit proud on the other.
The compatibility gotcha: ECO frames are cut to a more aggressive extrusion profile than off-the-shelf big-box trim expects, which means a standard 1×4 jamb extension leaves visible gaps unless it’s back-cut or shimmed correctly. We’ve fixed enough of those gaps in College Park and Baldwin Park kitchens to know the difference between an OEM-recommended reveal and a “close enough” install. For inside-mount applications, we prefer true OEM extension jambs when available; for outside-mount trim, a quality aftermarket PVC trim from a brand like Azek or Veranda performs well in Orlando’s humidity and carries its own manufacturer warranty. The key is matching the jamb depth to your actual frame, not the nominal series spec, because ECO’s manufacturing tolerances have shifted slightly across model years.
Styles & brands we work with
Signs Your ECO Window Systems Kitchen Remodeling Is Failing
- Water staining at the sill corners or under the window. This is the classic sign that the backsplash or counter install broke the window’s drainage plane. In Orlando’s wet season, a failed sill seal shows itself within a few months. The fix usually requires pulling the affected tile, resealing, and reinstalling with proper flashing tape.
- Visible gap between the window frame and new drywall or trim. This happens when extension jambs were cut for the wrong frame depth. Beyond looking wrong, the gap lets humid air into the wall cavity and lets conditioned air out, which shows up on your power bill.
- Cabinet crown or uppers sitting tighter to the frame on one side than the other. ECO frames installed slightly out of square in a wood-frame house will compound as you add precise millwork. If a cabinet installer forces square over an un-square window, the reveal walks visibly across the run.
- Condensation collecting on the interior glass edge in the morning. Not always a remodel issue, but if new venting or an island range hood changed the airflow in your kitchen, interior humidity can spike and expose weak seals. Sometimes it’s the existing window unit; more often it’s a ventilation problem we can solve during the remodel.
- Caulk lines cracking or separating at the window-to-counter junction. Silicone applied over improperly prepped or damp surfaces fails fast in Florida. If you can see daylight through a gap or the caulk peels back with a fingernail, water is already working behind it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, a kitchen remodel that includes proper ECO Window Systems integration runs $14,000 – $45,000. Window-only work, like replacing extension jambs, retrimming, and resealing an existing ECO unit, falls on the low end. A full gut with new cabinets, quartz counters, flooring, and rewiring lands at the top. Here’s how the scope breaks down:
- Window trim and jamb correction only: $800 – $2,500 depending on how many windows and how much tile has to come out
- Full kitchen remodel with ECO integration: $14,000 – $45,000 including cabinetry, counters, backsplash, and finishing
- Countertop installation: $2,000 – $6,500 (Cambria, Silestone, and Caesarstone are our standard options)
- Cabinet installation: $4,000 – $13,000 (KraftMaid and Wellborn are our usual lines)
- Backsplash installation: $800 – $2,500
Every price is written down before we start, and the number you approve is the number you pay. No change orders because we “found something” unless you specifically ask us to expand scope, and then it’s in writing first. The 365-Day Done Right Promise covers our workmanship for a full year after we close the job.
DIY or Call Us?
You can safely check the gap between your window frame and the new drywall or trim. You can run a bead of painter’s caulk along a hairline crack to buy time. You can pull a vent cover and look for moisture. What you shouldn’t do is pull tile, remove a window’s interior trim while the window is still seated, or try to shim an upper cabinet because the reveal looks off. Without knowing how the window is anchored and where the flashing laps sit, you can create a leak that runs inside the wall for months before you see it.
We bring the right extension jambs, the right flashing tape, and a crew that’s done this specific junction in Orlando kitchens enough times to know what fails. If you’re not sure whether your problem is the window or the remodel around it, call us at (850) 809-0306 and we’ll tell you straight what we see.
FAQs
Expect 15 to 25 years of useful life from an ECO Window Systems unit in Central Florida, with the caveat that Orlando’s humidity, afternoon thunderstorms, and intense UV exposure will break down seals and gaskets faster than a dry climate will. Proper remodel integration extends that lifespan by keeping the drainage plane intact.
In most cases, yes. Pulling the affected tile, cutting back damaged drywall, replacing the flashing, and retrimming fixes the issue for about a quarter of what a full window replacement costs. Call (850) 809-0306 and we’ll give you a written price before any work starts.
For trim, jamb, and seal work on one to three windows, expect one to two days. If the work is part of a full kitchen remodel, the window work happens in the first week and the full project typically runs four to eight weeks depending on cabinet lead times.
We keep standard-depth extension jambs, flashing tape, backer rod, and trim profiles that match the most common ECO frame depths we see in Orlando homes. Anything model-specific gets ordered before your install date so there’s no mid-job wait. For a full compatibility check, call (850) 809-0306 and we’ll work it out over the phone.
Good work doesn’t need a speech, it just needs to hold up. If your ECO Window Systems kitchen remodel is leaking, gapping, or sitting wrong, we’ll look at it and tell you what it actually needs.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
