Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Orlando Owner’s Guide
Most Orlando homeowners call us when an IKO-branded bath component has failed and they need a straight answer on what it costs to fix it right. A full IKO bathroom remodel in Orlando typically runs $9,000 to $28,000 installed, depending on what’s behind the walls and how far the water has traveled. If you’ve got a cracked IKO shower base, a leaking IKO shower door, or failed waterproofing behind IKO wall panels, the first sign is usually water where it shouldn’t be.
Here’s the honest picture: IKO is primarily known as a roofing and waterproofing manufacturer, and in bathroom applications, their membranes and underlayments sometimes get paired with other fixture brands. The failure point is rarely the IKO product itself. It’s usually what happened during the original install. We see this constantly in Orlando homes built or flipped between 2005 and 2015. A waterproofing membrane gets nicked during tile work, a shower pan doesn’t get the right slope, or someone skipped the flood test. The IKO product was doing its job until the surrounding system stopped supporting it. Luca Romano has spent two decades tracing these failures back to root cause, not just patching the visible symptom.
Key takeaways:
- A complete IKO-bathroom remodel in Orlando runs $9,000 – $28,000 installed
- Most IKO-related failures are install errors, not product defects
- We stock common IKO-compatible membranes, shower pans, and waterproofing materials on the truck
- Written price before we start, no change orders, 365-Day Done Right Promise
Which IKO Models This Applies To
IKO doesn’t manufacture faucets or vanities. What they make is the invisible layer: waterproofing membranes, underlayments, and shower pan liners that go underneath tile and behind wall systems. If your Orlando bathroom was built with an IKO membrane underneath the tile floor or behind the shower walls, that’s the product we’re talking about here.
There are two IKO product lines that show up in Orlando bathrooms. The first is IKO’s self-adhered waterproofing membrane, which comes in rolls and is applied to shower walls, tub surrounds, and bathroom floors before tile goes down. The second is their PVC shower pan liner, used under mortar-bed shower floors. The compatibility gotcha that matters to homeowners: IKO membranes are not interchangeable across all modified thinsets. Pairing some IKO products with the wrong type of tile adhesive voids the manufacturer’s performance expectation. We verify what’s behind your tile before recommending a path forward.
If you’re trying to identify what you have, look in the access panel behind the plumbing or at the edge of the shower pan where the liner is visible. The IKO branding is usually printed on the membrane. If you can’t find it, we will during the estimate. Aftermarket equivalents exist for both product lines, and in some cases they’re functionally identical. For shower pan liners, we recommend staying with a name-brand PVC liner rather than a generic, because the failure mode is so expensive. For wall membranes, a quality aftermarket product from a known waterproofing manufacturer can perform just as well when installed correctly. We’ll show you both options with the line-item prices in writing.
One more thing to know: we’re an independent remodeling contractor in Orlando, not affiliated with IKO. We install and repair bathrooms that contain IKO products, and we also work with KraftMaid cabinetry, Cambria and Silestone countertops, Kohler and Toto fixtures. Your material choice drives the price, not our preference.
Styles & brands we work with
Signs Your IKO Bathroom Remodeling Is Failing
- Water staining on the ceiling below the bathroom. This means the waterproofing layer under your tile has been breached. The IKO membrane has a seam that failed or was pierced, and water is traveling through the subfloor. By the time you see a ceiling stain, the leak has been active for weeks or months.
- Grout that stays dark or wet after the shower dries. Grout is not waterproof. If water is lingering in the grout lines instead of evaporating, the slope underneath is wrong or the membrane has a low spot pooling water. That water sits against the IKO liner and eventually works its way through.
- A musty smell that comes and goes. Trapped moisture behind tile or under the shower pan is the most common cause. Even if you don’t see visible damage, that odor means the waterproofing is compromised somewhere. In Orlando’s humidity, this gets worse fast because the space never fully dries out.
- Loose or hollow-sounding tile near the shower curb or floor. When the substrate underneath starts to rot or crumble, tile loses its bond. The IKO membrane could be intact but the mortar bed underneath it has turned to mush. Tapping on the tile and hearing a hollow sound is a red flag.
- The shower pan flexes or squeaks when you stand on it. A properly installed shower pan with a solid mortar bed should feel like standing on concrete. Flex means the base is degrading under the IKO liner. That movement creates stress cracks in the liner over time, which is how small leaks become full replacements.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full IKO bathroom remodel in Orlando lands between $9,000 and $28,000 installed. The spread comes down to this: are we fixing a shower pan, or are we rebuilding the entire bathroom? A contained shower rebuild with new IKO-compatible waterproofing, new pan, new tile, and new fixtures sits at the lower end. A full gut with new vanities, countertops, lighting, flooring, and re-plumbing the walls climbs toward the top.
Here’s the line-item picture for Orlando:
- Shower waterproofing system replacement (membrane + pan): $3,500 – $8,500
- Tub-to-shower conversion with IKO waterproofing: $3,500 – $10,000
- Full bathroom remodel (tile, pan, vanity, fixtures, lighting): $9,000 – $28,000
- Small bathroom or powder room remodel: $5,000 – $12,000
- Walk-in shower installation with IKO membrane: $4,500 – $12,000
Every one of our Orlando bathroom projects starts with a written, line-item price before any work begins. That number includes demolition, materials, labor, haul-away, and the permit when one is required. It does not change once we start unless you ask for something different mid-project, and even then we put the change in writing first. The 365-Day Done Right Promise covers the full install: if something isn’t done right, we make it right within the first year, no debate. We also back the workmanship with our standard written guarantee on every repair.
DIY or Call Us?
If the issue is cosmetic, like a failing caulk joint around a tub or shower surround, most homeowners can handle a clean-out and re-caulk on a Saturday afternoon. The same goes for tightening a loose toilet mounting bolt or replacing a shower head. Those are the safe calls.
If the failure involves the waterproofing membrane under tile, a cracked shower pan, a leaking curb, or water that has reached the subfloor, DIY becomes expensive fast. You can’t see the full extent of the damage until you open the wall or pull the pan, and by that point you’ve committed to a rebuild. The dangerous part isn’t the demo, it’s the re-waterproofing. Bad waterproofing is the number one reason we get called back to redo someone else’s work in Orlando. Water finds the flaw every time. If you’re seeing signs of a compromised IKO membrane, call us at (850) 809-0306. We’ll diagnose before we quote, and the estimate is free.
FAQs
An IKO membrane installed correctly over a proper substrate should last 15 to 25 years, though Orlando’s heat and humidity shorten that window if ventilation is poor. The most common lifespan limiter we see is a bathroom fan that isn’t doing its job, which keeps moisture in the wall cavity long after the shower is done. Call (850) 809-0306 and we’ll take a look before you commit to anything.
Yes, if the failure is localized and we catch it before the subfloor rots. A seam repair or a patch behind a single wall of tile is sometimes possible. But if the leak has spread under the shower pan or into the floor structure, a partial repair just moves the problem to a new corner. We’ll show you what we find during the estimate, with photos.
Most full IKO bathroom remodels in Orlando take 2 to 3 weeks, start to finish. Shower-only rebuilds run 5 to 8 working days. You get a schedule in writing before we start, and our crew shows up when they say they will, with live arrival tracking through The Relay Visibility Guarantee.
We keep common IKO-compatible membranes, PVC shower pan liners, drains, and bonding materials on hand for service calls. If your project calls for a specific IKO product line that isn’t standard stock, we order it and typically have it in hand with a day or two. Either way, we don’t start until the right materials are in front of us.
Ready for a real number? Call Sawyer Remodel Orlando at (850) 809-0306 for a free estimate on your IKO bathroom remodel. Written price, live updates, and a job done right the first time. Good work doesn’t need a speech, it just needs to hold up.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
