Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Orlando Homeowners Choose Jerith Construction
We provide independent Jerith in Orlando aluminum fence and gate repair, installation, and refinishing, with a decade of hands-on experience rebuilding Spear Top panels, Estate Series gates, Flat Top sections, and Puppy Picket enclosures. Our work differs because we know how Jerith powder coat behaves in Florida humidity, what sandy Orlando soil does to gate posts over time, and which repairs hold up versus which ones come back in a year. We are not an authorized Jerith dealer or manufacturer affiliate. We are an independent service provider that has fixed, matched, and installed Jerith systems long enough to know the brand’s “we’re tired of looking at it” failure points better than most. If you have a Jerith fence or gate that is sagging, peeling, corroding, or rattling, call (850) 809-0306 and we will give you a written price before any work starts.
Why Trust Sawyer Remodel Orlando for Your Jerith Construction?
Luca Romano, our owner and lead contractor, grew up around framing crews in Los Angeles and trained in finish carpentry and structural work at LA Trade-Tech before spending the better part of two decades leading jobs across Central Florida. That means our team does not treat Jerith aluminum fencing as a “swap the part and go” job. We approach it the way a finish carpenter would: checking post plumb, rail alignment, gate swing load, and coating adhesion before touching a single screw.
We have repaired enough Jerith service in Winter Park and Orlando enclosures to know the brand’s aluminum alloy takes powder coat differently than steel or vinyl. We know that Jerith’s polyester resin panel clips, the ones holding pickets inside the top and bottom rails, degrade under Florida UV faster than the manufacturer’s lifespan charts suggest. We know that a sagging Jerith gate in College Park is rarely a hinge problem. It is almost always hinge post movement from the sandy, high-moisture soil that shifts through wet and dry cycles every Orlando summer. When you hire us, you get that specific knowledge applied to your fence, not a generic “fence guy” guessing at the brand. And every job carries the same commitments we put on all our remodeling work: a written price before work starts, live arrival time tracking, photo updates before and after, and the 365-Day Done Right Promise in writing. If it is not done right, we make it right.
Styles & brands we work with
Common Jerith Construction Problems We Fix in Orlando
- Powder coat bubbling and peeling along bottom rails. This is the single most common Jerith issue we see in Orlando neighborhoods where irrigation runs on a schedule. Sprinkler overspray hits the bottom rail daily, and Florida’s hard water leaves mineral deposits that eat into the coating from the edge of every scratch inward. We fix it by pulling the affected panels, stripping the rail, re-powder coating to AAMA 2604 spec, and reinstalling with stainless fasteners and properly drilled weep holes so moisture exits instead of pooling.
- Gate sagging and latch misalignment from hinge post movement. We see this constantly in Orlando’s master-planned communities built on former swampland. The soil holds water through the summer, dries and contracts in winter, and the hinge post slowly leans. Jerith gates are light enough that the hinges stay tight, but the post itself shifts. The fix is not shimming the latch. It is resetting the post in properly compacted aggregate with a wider concrete footing, then re-hanging the gate to spec.
- Corrosion at post base concrete contact. Older Jerith installations without weep holes trap water inside the post extrusion where it meets the concrete footer. Aluminum does not rust, but it does corrode, especially where standing water sits against raw cut edges. We cut out the corroded section, treat the remaining aluminum, weld in a new section where needed, and drill weep holes so the enclosure drains like Jerith’s newer designs do.
- Loose pickets rattling in high wind. After about six to eight years of Florida sun, the polyester resin clips holding Jerith pickets inside the rails become brittle and crack. Then every thunderstorm turns the fence into a wind chime. We replace the clips, and in sections where the rail channel itself has worn, we install new rails while reusing the pickets where they still match.
- Discontinued color matching on older Jerith panels. Jerith has changed its standard color lineup over the years, which means owners with Antique Bronze or older matte finishes cannot simply order a match from the manufacturer. We work with local Orlando finishers who mix AAMA 2604 powder coat to the exact original shade, so a repaired panel blends instead of standing out like a patch.
Jerith Parts & Our Repair-vs-Replace Approach
We stock genuine Jerith pickets, rails, gate hardware, hinges, and latches for the common profiles in Orlando: Spear Top, Flat Top, Puppy Picket, and Estate Series gate components. When a color has been discontinued, we have matching AAMA 2604 powder coat applied by a local finisher who has done enough Jerith panels for us that the match is nearly invisible. We do not push aftermarket parts on Jerith systems unless an owner prefers them for budget reasons, and when we do, we say so plainly on the written quote.
Our repair-versus-replace rule is simple. Gates and small sections under 20% corrosion get repaired. Panels where corrosion exceeds 20% of the rail get replaced, because aluminum that has lost that much coating will keep failing even after treatment. We would rather tell you that on the front end than come back in 14 months asking to do the bigger job anyway. Call (850) 809-0306 if you want an honest read on your fence.
Our Jerith Service Process – Step by Step
- 1
Diagnosis and written price. We inspect every post, rail, picket, clip, hinge, and latch on your Jerith system. You get a written line-item quote with the exact repair scope and part source (OEM, custom-matched powder coat, or aftermarket) before any work starts.
- 2
Repair or install. For repairs, we pull only the panels we need, preserve undamaged pickets and rails where possible, and use stainless steel fasteners on every reinstall. For new Jerith installs, we set posts in properly compacted aggregate with concrete footers sized for sandy Orlando soil, not the minimum a manufacturer chart suggests.
- 3
Function test. Every gate gets cycled full-open to full-closed at least 10 times, with the latch engaging cleanly on both flat and sloped approach. Panels get a wind-rattle check. Weep holes get a water-flow test.
- 4
Warranty walkthrough. We photo-document the finished work, walk the fence line with you, explain what we did and why, and hand over the 365-Day Done Right Promise in writing. You know exactly what is covered and for how long.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Orlando
Our crew works on the full Jerith residential aluminum lineup. That includes the Residential Spear Top Aluminum Fence, the classic pointed-picket profile you see across Orlando HOAs and lakefront properties; Flat Top Aluminum Fence, which is common in modern and zero-lot-line developments; Puppy Picket Aluminum Fence, the short-picket option built for small-dog containment; and Estate Series Aluminum Gates, including custom-width and double-drive gates. We stock common Spear Top and Flat Top pickets and rails locally, along with Estate gate hinges and latches, so most repairs do not wait on a freight order from out of state.
We Also Service These Brands
Jerith in Casselberry and Orlando is not the only product line we know well. Our Orlando crews install and repair vinyl and aluminum fencing beyond Jerith, and we carry cabinetry lines including KraftMaid, countertop materials like Cambria and Silestone, and plumbing fixtures from Kohler across our broader remodeling work. If your project touches more than fencing, you are not calling three contractors. You are calling one crew with one written price.
FAQs – Jerith Construction Service in Orlando
Yes, in most cases. If the bubbling and peeling is limited to the bottom rail or lower picket areas, we remove the affected panels, sandblast or chemically strip the damaged coating, have the rail re-powder coated to AAMA 2604 spec in the matching color, and reinstall with stainless fasteners and added weep holes. Full replacement is only necessary when corrosion has spread across more than about 20% of the rail. Call (850) 809-0306 and we will tell you which category your fence falls into after an inspection.
In Orlando, the usual cause is hinge post movement in sandy, wet soil, not hinge wear. The post shifts through wet-dry cycles, the gate leans, and the latch misses. We reset the hinge post in compacted aggregate with a larger concrete footer, then re-hang the gate to factory spec. Shimming the latch or bending the hinge is a temporary band-aid we will not sell you, because it fails again. Call (850) 809-0306 for a written quote on a permanent fix.
For current Jerith colors, we order genuine Jerith pickets and rails so the match is exact. For discontinued colors like Antique Bronze, we have a local Orlando finishing partner who mixes AAMA 2604 powder coat to the original panel’s color and applies it after we strip the damaged section. The match is close enough that from five feet away, you cannot find the repair. Bring us an existing panel or a photo and we will confirm the match path before ordering anything.
Yes. Lakefront and wetland-adjacent lots in Orlando, including areas built on drained wetland like Avalon Park or Lake Nona, have shallow groundwater and softer soil than inland higher-elevation lots. That affects how we set posts: deeper footers, more compacted aggregate, and larger concrete bells so the fence does not move when the water table rises and falls. We install Jerith aluminum fencing on lakefront properties regularly and price the soil conditions into the written quote from the start. Call (850) 809-0306 to schedule a site visit.
We can. The conversion depends on the gate’s weight, current hinge condition, post plumb, and available power. Jerith Estate Series gates are aluminum and light enough for most residential automatic openers, but the hinge posts have to be rock solid or the opener will bind. We assess all of that during the quote, recommend an opener matched to the gate’s weight and swing arc, and install it with the same written-price commitment as every other job. Call (850) 809-0306 and we will spec the right opener for your gate.
Jerith aluminum fence installation in Orlando typically runs $4,000 to $10,000 depending on linear footage, gate count, soil conditions, and whether we are removing an old fence. Vinyl fence installation runs $3,500 to $9,000. Emergency and storm damage repair runs $400 to $1,800 depending on the scope. Here is the line-item breakdown:
| Jerith Service | Orlando Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Emergency & Storm Damage | $400 – $1,800 |
These ranges reflect what we quote on real Orlando jobs, not national averages. Your exact price depends on footage, access, soil, and gate hardware. Call (850) 809-0306 for a free written estimate on your specific fence.
Book Your Jerith Service in Orlando, FL
If your Jerith fence is peeling, sagging, rattling, or just showing its age in Orlando’s heat and humidity, call (850) 809-0306. We will inspect it, tell you what is actually wrong, and hand you a written price before any work starts. Free estimates, no change orders, and a full year of accountability after the job closes.
Written by Luca Romano, Owner & General Contractor at Sawyer Remodel Orlando, serving Orlando since 2005.
