Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Orlando Owner’s Guide
If you’ve got Oldcastle kitchen components that are failing, we stock and install compatible replacement parts across Orlando at an installed price that typically runs $14,000 to $45,000 for a full kitchen remodel, with smaller part-specific replacements falling well under that. Most Orlando homeowners discover the problem the same way: a cabinet door that won’t stay shut, a countertop seam that’s opened up after a humid Florida summer, or tile grout that’s cracked and letting water behind the backsplash. The part itself is rarely the expensive piece. The labor to remove the old one, prep the surface, and install the replacement correctly is where the real cost lives. We’re an independent contractor, not affiliated with Oldcastle, but we work with their product lines regularly and know what fails first in Central Florida’s climate.
Key Takeaways:
- Installed kitchen remodeling ranges from $14,000 to $45,000 in Orlando depending on scope
- Smaller, part-specific replacements like a single cabinet or backsplash section cost far less
- We match Oldcastle component specs and install name-brand alternatives where the OEM part is discontinued
- Every job gets a written price before work starts, backed by our 365-Day Done Right Promise
Which Oldcastle Models This Applies To
Oldcastle produced kitchen components under several series lines over the years, and the compatibility gotcha that trips up most Orlando homeowners is this: cabinet box dimensions and door hinge spacing changed between their early-2000s lines and the later production runs. A door from a 2006 Oldcastle cabinet will not hang on a 2015 frame without modifying the hinge cups. We identify the right match by checking the stamp inside the drawer box or the label on the back of the cabinet face frame, then measuring hinge spacing center-to-center. If the label is gone, we measure the door overlay and the bore pattern. For countertop components, Oldcastle used standard 2cm and 3cm slab thicknesses, but their edge profiles changed over time. An ogee edge from one run won’t meet a bullnose from another without a visible seam. When an OEM Oldcastle part is discontinued, we install quality aftermarket equivalents from KraftMaid, Cambria, or Silestone that match the original dimensions and finish. For most homeowners, the aftermarket option gets them a better product at the same or lower price than tracking down old OEM stock.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed or hang crooked. The adjustable hinges on older Oldcastle cabinets wear out at the pivot point, especially the self-closing mechanisms. Once the spring inside the hinge loses tension, the door drifts open or sags at the corner.
- Countertop seams that have opened up or turned dark. In Orlando’s humidity, laminate and solid surface seams absorb moisture and swell. What starts as a hairline gap becomes a black line of mildew inside six months if it isn’t addressed.
- Backsplash grout that’s cracking or falling out in chunks. This usually points to movement behind the tile, not just old grout. Central Florida homes shift with seasonal moisture changes in the soil, and that movement telegraphs through the grout lines first.
- Soft spots under the sink base or lower cabinets. A slow leak from the plumbing that’s been hidden behind the toe kick rots the cabinet floor from below. By the time you feel softness, the structural box needs section replacement, not just a patch.
- Drawer slides that bind, pop, or grind when opened. Oldcastle used side-mount slides on many mid-range lines, and those plastic rollers flatten over time. When the ball bearings start spilling out of the track, the drawer is chewing up the cabinet stile every time it moves.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, a full kitchen remodel with Oldcastle-compatible replacement components runs $14,000 to $45,000 installed. Where you land in that range depends on kitchen size, whether you’re replacing cabinets or just doors and hardware, countertop material, and whether we’re moving plumbing or electrical. Smaller scoped jobs break down like this:
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
Every quote includes the parts, labor, haul-away of the old components, and a written line-item breakdown so you see exactly what you’re paying for. The number we quote is the number you pay. No change orders unless you ask us to add scope. The work is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right. In writing, on every job.
DIY or Call Us?
You can safely check a few things yourself: look for the manufacturer label inside a drawer box, measure your hinge spacing, and take photos of the failing component from a couple angles. That helps us quote accurately over the phone. What you shouldn’t do is start pulling cabinets off walls, cutting countertop seams, or prying up tile. Cabinet boxes that are glued and screwed to the wall will take drywall with them if you yank them without cutting the fasteners first. Countertop seams opened up wrong lead to mismatched edges you can’t un-cut. And if you’ve got water damage under the sink, there’s a real chance you’re looking at mold behind the cabinet back that needs proper remediation before any new part goes in. Good work doesn’t need a speech, it just needs to hold up. Call (850) 809-0306 and we’ll get you scheduled for a free estimate.
FAQs
In Orlando’s climate, expect 15 to 20 years from Oldcastle cabinet boxes if the kitchen is properly ventilated and leaks are caught early. Humidity is the real killer here. Cabinets in kitchens without a working exhaust fan or with constant plumbing issues can fail in under a decade.
Yes, in many cases we can replace hinges, slides, drawer boxes, or a single cabinet section without tearing out the whole kitchen. The decision comes down to whether the cabinet box itself is structurally sound. If the box is swollen, delaminating, or rotted, the repair won’t last and replacement is cheaper long-term. Call (850) 809-0306 for an exact quote.
A full kitchen replacement typically runs 2 to 4 weeks from demo to final walkthrough in Orlando, depending on countertop fabrication lead times and whether we’re moving plumbing or electrical. Smaller part-specific replacements like a single cabinet or backsplash section usually finish in 1 to 3 days.
We stock common hardware like hinges, slides, and cabinet door catches on our trucks, plus we have direct relationships with suppliers who carry Oldcastle-compatible cabinet components across Central Florida. For countertop and backsplash materials, we quote from current Orlando fabricator inventory so you’re not waiting on a specialty order. Call (850) 809-0306 and we’ll tell you over the phone what we’ve got and what needs ordering.
If you’ve got a failed Oldcastle component in your kitchen, don’t wait for water damage or structural failure to spread. Call Sawyer Remodel Orlando at (850) 809-0306 for a free estimate. We’ll put the price in writing before any work starts, confirm who’s coming and when they’ll arrive, and back the whole job with the 365-Day Done Right Promise. Luca Romano and the crew handle Oldcastle-compatible replacements across Orlando every week, and we’ll treat your kitchen like it’s our own.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
