Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Driveway & Pavers: The Orlando Owner’s Guide
If you need driveway or paver work tied to your Therma-Tru exterior, you’re looking at $7,000 – $18,000 for a full paver driveway installation in Orlando, and $5,000 – $14,000 for driveway replacement. We stock Therma-Tru-compatible hardware and work with paver systems that fit the exact entry and driveway transitions Therma-Tru door assemblies require. Most Orlando homeowners discover this need the hard way: a paver sinks next to the garage apron, the threshold gap widens, or the driveway edge starts crumbling where it meets the door’s sill line.
Therma-Tru doesn’t manufacture pavers, but their door systems are engineered around specific sill heights, drainage slopes, and entry transitions. The driveway and paver decisions you make have to respect those tolerances or you’ll get water running toward the door instead of away from it. Luca Romano has seen that mistake in College Park more times than he can count, usually from a quick driveway pour that ignored the door’s weep holes.
Which Therma-Tru Models This Applies To
This page applies to any Orlando home with a Therma-Tru entry door, side door, or garage-to-house door whose sill interacts with a driveway, walkway, or paver surface. That covers the Classic-Craft, Fiber-Classic, Pulse, and Benchmark lines. The compatibility question isn’t about the door model itself; it’s about your rough opening height, sill profile, and what the existing driveway elevation does as it approaches the threshold.
The gotcha most people miss: Therma-Tru sills are engineered to sit at a specific height above grade to keep water out. If a new paver installation raises the finished surface too close to that sill, you have a drainage problem. If it drops too low, you have a trip hazard and a code issue. Before any paver or driveway work starts, we measure from the top of the sill to the planned finished grade. That measurement, not the paver catalog, drives the whole job.
On the OEM-versus-aftermarket question: Therma-Tru door sweeps, sill components, and weatherstripping are OEM parts we match by door model. The pavers themselves are a separate purchase from quality Florida suppliers we have working relationships with. Sawyer Remodel Orlando is an independent contractor, not affiliated with Therma-Tru, but we know their sill dimensions well enough to plan the transition correctly.
Styles & brands we work with
Signs Your Therma-Tru Driveway & Pavers Is Failing
- Sinking pavers near the garage apron or entry walk. This is usually base material failure or erosion underneath. Water from Orlando’s rainy season finds its way under the pavers, washes out the sand base, and the surface drops. That drop changes the elevation relationship to your Therma-Tru sill.
- Water pooling against the door threshold after rain. When the driveway grade shifts even an inch, water that used to run away from the house now sits against the sill. You’ll see staining on the sill and eventually wood rot at the rough opening.
- Cracked or shifting paver edges at the driveway border. Florida sun breaks down paver edge restraints over time. Once the edge lets go, the whole field starts moving outward. The result is an uneven surface and a widening gap between driveway and garage entrance.
- Visible gap between the Therma-Tru sill and the concrete or paver surface. This gap is a flashing failure waiting to happen. Bugs, moisture, and air get in, and the door’s thermal seal is compromised.
- Door sweep dragging on the pavers or leaving scrape marks. If your paver installation raised the surface too high, the door sweep catches every time the door opens. That wears the sweep out in months instead of years, and the drag means you’re forcing the door, which stresses the hinges.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, paver driveway installation runs $7,000 – $18,000 depending on square footage, base depth, and paver style. Driveway replacement typically falls between $5,000 and $14,000. If the scope is just the entry transition and the section of pavers immediately around the door, you’re usually looking at a smaller job that gets priced at the estimate.
What drives the range: total area, whether we’re removing an existing slab or working over compacted ground, paver thickness (60mm versus 80mm), and whether we need to reset the Therma-Tru sill or adjust the door’s weatherstripping to match the new elevation. Every quote is a written line-item price under The Relay Standard. You approve the number before any work starts, and that’s the number on the invoice. The workmanship is covered by our 365-Day Done Right Promise. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check the sightline from your Therma-Tru sill to the driveway grade with a level and a tape measure. If water is pooling, note where. If the pavers are sinking, watch whether it worsens after a heavy rain. That’s useful information for us, and it’s safe for you to gather.
What we don’t recommend is pulling up pavers and re-compacting the base yourself. Driveway pavers in Orlando sit on a compacted base that supports vehicle weight. If you reset the surface without fixing the base, you’ll have the same problem in six months. The part where a homeowner gets hurt is moving full-size pavers by hand and trying to relevel a threshold that’s tied to the door assembly. Call (850) 809-0306 and we’ll measure, quote, and do it once. Good work doesn’t need a speech – it just needs to hold up.
FAQs
A properly installed paver driveway in Florida lasts 25 to 30 years with basic maintenance. The weak points are the base material and the edge restraints; when those fail, the pavers themselves can still be reused and reset. If your pavers are failing under 10 years, the original base was wrong.
Call (850) 809-0306 and we’ll inspect the base, not just the surface. Estimates are free.
Yes, when the failure is localized to a section of pavers or a bad edge, we can pull that section, re-grade the base, and reset the pavers. If the Therma-Tru sill is involved, the repair needs to address the elevation relationship as well so water keeps running away from the door. Not every driveway failure requires a full replacement.
Call (850) 809-0306 for an exact quote on a repair versus replacement.
Most Orlando paver driveway installations take 3 to 5 working days from removal to final compaction and sanding. Entry transition work that involves the Therma-Tru sill usually adds a day because we’re matching the door’s drainage profile. We schedule with The Relay Visibility Guarantee so you get a live arrival time and photo updates before and after.
We stock common Therma-Tru door sweeps, sill caps, and weatherstripping for the Classic-Craft, Fiber-Classic, and Pulse lines, plus hardware we use daily on KraftMaid, Cambria, and Silestone projects. If your door needs a specific OEM component, we order it and continue the paver work while it ships. The walkway gets done right; the door gets matched right.
Call (850) 809-0306 to schedule your free estimate. We’ll measure the grade, check your sill, and give you a written number before anything gets touched.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
