Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Orlando Owner’s Guide
Tremron bathroom remodeling in Orlando typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a failing shower pan, re-doing tile work around a Tremron paver accent wall, or gutting the whole room. Most homeowners discover they need this work the same way: grout lines start crumbling, water stains appear on the ceiling below, or the shower floor feels soft underfoot. We keep Tremron-compatible materials on hand and can usually start within a week of the estimate, not a month.
The failure pattern we see most in Orlando is moisture working its way behind Tremron pavers and into the substrate. Florida humidity doesn’t help. Once water gets behind the surface layer, the damage spreads fast, and by the time you see it, the repair is rarely a patch job.
Which Tremron Models This Applies To
Tremron makes pavers, wall blocks, and hardscape materials, not bathroom fixtures. When Orlando homeowners talk about Tremron in a bathroom, they’re almost always referencing a Tremron paver used as a decorative shower floor, an accent wall behind a vanity, or a tub surround. The compatibility question isn’t about model numbers; it’s about thickness, joint width, and how the paver was set.
Here’s the gotcha most people miss: Tremron pavers are manufactured for outdoor use. They’re thicker than standard indoor tile, typically 2-3/8 inches versus the 3/8 inch you’d see on a ceramic tile floor. That thickness changes how we prep the subfloor, how we slope the shower pan, and how we handle the transition where the bathroom floor meets the hallway. If the wrong mortar was used originally, or if the pavers were set directly on a wood subfloor without a proper waterproof membrane, the install was doomed from day one. We identify the right fix by pulling a paver, checking what’s underneath, and matching the replacement method to what’s actually there, not what should have been there.
For OEM versus aftermarket: Tremron doesn’t make a specific “bathroom line,” so there’s no OEM bathroom part to source. The real decision is whether to reuse the existing pavers if they’re still sound, or replace them with a new Tremron product or a porcelain tile made for wet areas. Sawyer Remodel Orlando is an independent contractor, not affiliated with Tremron, so we’ll give you the straight answer on which path makes sense for your bathroom and budget.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Grout cracking or falling out between pavers. This is usually the first sign. In Orlando’s humidity, the wood subfloor expands and contracts more than the rigid paver surface, which stresses the joints until they fail. Once grout is gone, water has a direct path underneath.
- A soft or spongy spot in the shower floor. The waterproof membrane underneath has failed and water is soaking into the subfloor. By the time you feel softness, the plywood is already rotting. This is a gut-and-replace, not a band-aid.
- Water stains on the ceiling below the bathroom. This means the leak has gone completely through the floor assembly. We see this a lot in two-story Orlando homes where a second-floor bathroom sits over a living space. The stain shows up weeks before any other symptom.
- Musty smell that won’t go away. Standing moisture behind or under the pavers feeds mold growth in the dark, warm cavity under the floor. No amount of bathroom fan time fixes this.
- Pavers shifting or rocking when you step on them. The mortar bed has broken down, often because the original installer used a standard thinset instead of a mortar rated for the paver’s thickness and outdoor-grade density. Once pavers move, water gets under all of them.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s our Orlando pricing for Tremron-related bathroom work, in writing, before any tool is picked up:
- Full bathroom remodel with Tremron paver accents: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Shower replacement (pan, waterproofing, new surface): $3,000 – $8,500
- Tub-to-shower conversion: $3,500 – $10,000
What drives the range: whether we’re replacing the waterproof membrane and subfloor (common in Orlando homes older than 15 years), whether the existing pavers can be salvaged or need replacing, and what you’re putting back in, a standard shower or a custom walk-in. Every quote includes parts, labor, demolition, and disposal. No surprise line items later. The number you approve is the number you pay, and the 365-Day Done Right Promise covers the work for a full year after we finish. In writing.
DIY or Call Us?
You can safely check a few things yourself: look for cracked or missing grout, check the ceiling below the bathroom for stains, and press on the shower floor to feel for softness. What you shouldn’t DIY is the fix. Pulling up Tremron pavers in a shower means cutting into the waterproofing layer, and if you don’t rebuild that correctly, you’ll have a slow leak inside your floor that you won’t see until the damage is extensive. It’s not high-tension dangerous like a garage door spring, but a failed waterproof membrane is a five-figure repair waiting to happen if the leak spreads to the subfloor and joists.
We’ve fixed enough DIY shower repairs in College Park and Baldwin Park to know that the second fix always costs more than the first one would have. If you suspect water is getting behind your Tremron installation, call (850) 809-0306 and we’ll come look before it gets worse.
FAQs
A properly installed Tremron paver bathroom surface should last 20 to 30 years, but the waterproofing membrane underneath has a realistic lifespan of 10 to 20 years in Florida’s humidity and heat. The most common failure point is the sealant or grout, which typically needs attention every 5 to 8 years. If the original membrane was installed incorrectly, all bets are off. Call (850) 809-0306 for a free inspection if your bathroom is showing any symptoms.
If the waterproofing under the pavers is intact and the damage is limited to surface grout or a few loose pavers, we can often do a targeted repair for far less than a full remodel. If the membrane has failed or the subfloor is soft, a partial fix will fail again, and we’ll tell you that straight. The only way to know is to pull a paver and look, which we do as part of a free estimate.
A full bathroom remodel with Tremron elements takes 2 to 4 weeks from demo to done. A shower-only replacement is typically 3 to 5 working days. Larger jobs with custom tile work or structural changes can run longer, and we’ll give you a schedule in writing before we start. You’ll get photo updates before and after key stages, and our crew shows up when the schedule says they will. Call (850) 809-0306 and we’ll map out a timeline for your specific project.
We keep common Tremron paver styles, waterproof membranes, and setting materials on our trucks and in our Orlando shop, but because Tremron runs seasonal color batches, an exact match to your existing pavers may require a short order window. We’ll tell you at the estimate whether we can match what you have or whether a complementary replacement makes more sense. We also handle KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, so the whole bathroom comes from one crew.
Ready to get it fixed right? Call (850) 809-0306 for a free estimate. We’ll put the price in writing, show up when we say we will, and send photos of the work as it happens. Good work doesn’t need a speech, it just needs to hold up.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
