







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tuff Shed Driveway & Pavers: The Orlando Owner’s Guide
We carry Tuff Shed-compatible driveway bases and paver systems, and a typical installed pad for a standard Tuff Shed runs $7,000 to $18,000 in Orlando depending on square footage, soil prep, and paver choice. You’ll usually know the base is failing when the shed floor starts feeling spongy near the door, or when pavers in front of the ramp begin sinking and separating after a heavy rain. Most Orlando callers find us because their shed sits on a slab or pavers that were never graded for Florida drainage, and now the door binds or the floor framing is wicking moisture.
Which Tuff Shed Models This Applies To
Every Tuff Shed model with a floor system relies on a level, drained base, but the compatibility questions change by series. The Premier PRO and Premier Tall Barn models have 2×4 or 2×6 floor joists and demand a base that carries weight evenly; the smaller Ranch and Sundance series are more forgiving but still need a pad that won’t heave in Orlando’s wet-dry clay cycles. If your shed came with a galvanized steel floor kit, you still need a base under it, and we match the pad dimensions to the exact model number on the silver tag inside the door frame. For OEM versus aftermarket: Tuff Shed doesn’t manufacture pavers, so the “OEM” conversation is really about the base spec. We recommend aftermarket concrete pavers rated for vehicular or shed loading from suppliers like Belgard or Tremron, which hold up better in Central Florida than the thin, big-box pavers that crack within two summers. One gotcha: if your shed was delivered with a pressure-treated skid foundation, that skid must sit on a compacted base at least 4 inches thick, not directly on pavers, or the floor will rot from the bottom up.
Styles & brands we work with







Signs Your Tuff Shed Driveway & Pavers Is Failing
- Paver settlement near the shed door: This usually means the base layer wasn’t compacted properly or the sand bedding has washed out. In Orlando, afternoon thunderstorms move a lot of water fast, and a 2-inch rut in front of the ramp is often the first tell.
- Cracks radiating from the slab corners: Clay soil under a thin slab expands and contracts with our wet season. Cracks wider than a quarter inch mean the base has lost support and the shed weight is now sitting unevenly.
- Door sticks or won’t close square: When the base settles unevenly, the shed frame racks slightly. The floor may still look fine, but the door binding is the shed telling you the pad underneath moved.
- Water pooling against the shed walls after rain: A properly graded pad sheds water away from the structure. If puddles sit against the wall plates for more than an hour, rot and termite activity follow within a season or two.
- Pavers rocking underfoot: Individual pavers that wobble mean the sand bed under them has eroded. Left alone, the wobble spreads and turns into a tripping hazard every time you walk into the shed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
An installed paver driveway or shed pad in Orlando runs $7,000 to $18,000, and the spread comes down to three things: square footage, how much excavation and soil correction the site needs, and the paver grade you pick. A basic 10×12 shed pad using standard 60mm pavers on a compacted base often lands near the lower end; a larger driveway extension with thicker pavers and concrete edging pushes toward the top. Every quote from us includes haul-off of old materials, site grading for positive drainage, compacted base, sand bedding, paver installation, and edge restraint so the perimeter doesn’t spread. You get a written price before we start, and the work carries our 365-Day Done Right Promise: if it’s not done right, we make it right. No change orders at the invoice.
DIY or Call Us?
You can absolutely check the easy things yourself: look for pavers that rock, check whether water is pooling against the shed, and measure any ruts with a straight 2×4. But pulling pavers and recompacting a base is a different job. Doing it wrong means the pad looks fine for six months and then sinks again after one Orlando rainy season. The biggest DIY mistake we see is owners adding sand under a paver that’s sinking, which treats the symptom while the base underneath keeps washing away. If the shed is heavy or you plan to store equipment in it, getting the base wrong warps the floor framing over time. Good work doesn’t need a speech; it just needs to hold up. Call us at (850) 809-0306 and we’ll give you an honest read on whether your pad can be saved or needs a proper rebuild.
FAQs

A properly installed paver base in Orlando lasts 25 to 30 years, but the surface may need re-sanding every 5 to 7 years as Florida rain slowly washes out the joints. Poor base prep is what kills most pads in 5 years or less.
Yes, if the settlement is localized and the surrounding pavers are still tight. We pull the affected area, recompact and correct the base, then relay the pavers. If the base failure has spread under the shed itself, a full replacement is usually cheaper than piecemeal fixes. Call (850) 809-0306 for an exact assessment, estimates are free.
Most Orlando shed pads take 2 to 3 days from excavation to final compaction. Larger paver driveways run 4 to 6 days depending on weather and site access.
We stock base rock, sand, and edge restraints on our trucks, and we order pavers from Tremron and Belgard by the job so you get the exact color and style you approved, not whatever was left in the yard. We also stock and install related materials for KraftMaid, Cambria, and Silestone projects, so if your shed project connects to a larger remodel we can tie it together.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.


