Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Orlando Owner’s Guide
Unilock kitchen remodeling in Orlando typically runs $14,000 to $45,000 installed, with most full remodels landing between $18,000 and $28,000 depending on layout changes, cabinetry, and countertop selections. We stock Unilock-compatible components and can match existing Unilock hardscape and surface products when a kitchen project extends into adjacent pavers or outdoor transitions. The call usually starts with a homeowner who’s staring at a failed part: a cracked paver transition at the kitchen door, a shifted Unilock surface where the remodel ties in, or a kitchen renovation stalled because the material spec doesn’t match the existing Unilock work outside.
If you’re mid-remodel and the Unilock piece doesn’t fit, doesn’t match, or failed under Florida’s heat and humidity, we can get the correct part quoted, ordered, and installed without derailing the rest of the project.
Which Unilock Models This Applies To
Unilock’s product line spans multiple paver and wall collections, and the compatibility gotcha in Orlando is real: Unilock’s EnduraColor and Series products use different manufacturing tolerances than their standard line. If your kitchen remodel includes a paver inset, a transition strip, or exterior wall surfaces that need to match existing Unilock work, pulling a part number from the back of one stone isn’t enough. We measure the actual unit dimensions, check the chamfer profile, and verify the color lot before ordering anything. Color lot matters more than most homeowners expect; a paver ordered two years ago won’t match a new one from a different lot, and Orlando’s UV exposure fades certain Unilock colors noticeably over five to seven years.
For Unilock specifically, the OEM vs. aftermarket decision is straightforward: structural parts and surface-matched pieces should be OEM Unilock. Decorative inserts, edge trim, and drainage components can often come from quality aftermarket equivalents at 20 – 40% less, but only if the spec truly matches. We’ll tell you which is which before you spend a dollar. Sawyer Remodel Orlando is an independent remodeling contractor; we’re not affiliated with Unilock, but we work with their materials constantly and know which parts actually interchange.
We also work with related lines in the same kitchen remodels: KraftMaid cabinetry, Cambria and Silestone countertops, and the Unilock surfaces that tie the space together.
Styles & brands we work with
Signs Your Unilock Kitchen Remodeling Is Failing
- The paver transition at the kitchen door has shifted or cracked. This is the most common failure point. Florida’s sandy soil compacts unevenly, and the heavy foot traffic at a kitchen entry eventually works a paver loose or cracks the edge piece.
- Water pools against the Unilock surface after rain. If the sub-base was never re-sloped after a previous remodel or a plumbing line was trenched through it, drainage stops working. In Orlando’s wet season, that’s a problem that gets worse by the week.
- The color has faded unevenly across the surface. UV exposure and cleaning product overspray from the kitchen (degreasers, bleach, citrus cleaners) can permanently alter Unilock surface color. Once the sealant layer is compromised, the stone absorbs whatever hits it.
- The Unilock wall or edging that frames the outdoor kitchen area has started to lean. Saturated soil from a poorly routed downspout or a small irrigation leak behind the wall will push it out of plumb. The first sign is usually a gap that appears at the top joint.
- You’re mid-remodel and the new pieces don’t sit flush with the old ones. Either the spec was wrong from the start, or the older Unilock product was discontinued and replaced with a “close enough” alternative that isn’t. Both problems are fixable, but only one of them is cheap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Unilock-related repair or replacement during a kitchen remodel in Orlando, here’s what you’re looking at:
- Unilock paver transition repair (kitchen door area): $600 – $2,500
- Unilock edge restoration and re-sloping: $1,500 – $4,500
- Full Unilock surface replacement tied to kitchen remodel: $7,000 – $18,000 (paver driveway/patio range)
- Complete kitchen remodel including Unilock transitions: $14,000 – $45,000
What drives the range is mostly sub-base condition and access. If the original installer skipped geotextile fabric or used fill sand instead of proper paver base, the repair costs more because we’re fixing what was never done right. The part itself is often the cheapest line item. Every quote includes the written price before work starts, the specific parts we’re ordering (with part numbers), and the install labor broken out separately. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right, in writing, for a full year.
DIY or Call Us?
You can safely do a few things yourself: measure the failed piece, photograph the damage from multiple angles, and check if there’s a visible part number or color code on the back or underside. That saves us a diagnosis visit and gets your quote faster. What you shouldn’t do is start pulling up Unilock pavers or dismantling edge restraints to “see what’s underneath.” Once you disturb the base layer, water finds its way in, the surrounding pieces shift, and what was a $900 repair becomes a $3,000 re-bedding job. If the failure involves a retaining wall or any surface holding back soil, leave it alone entirely; those carry real load and a collapsed wall in Orlando’s wet season isn’t a weekend project.
Call (850) 809-0306 and we’ll get the right part matched and the repair quoted. You’ll have a written number before any work starts.
FAQs
Unilock pavers and wall units typically last 30 to 50 years themselves, but the base underneath often fails within 10 to 15 years in Orlando because of sandy soil, heavy summer rains, and poor original compaction. You’ll usually see the base fail before the stone fails.
Yes, if the damage is limited to one or two units and the base is still solid, we can pull and re-set matching pieces, often for a few hundred dollars. If the base has failed or the color lot is no longer available, full section replacement is the better call. Call (850) 809-0306 and we’ll tell you which one you’re looking at.
Most transition repairs and small section replacements take one to two days on site once the parts are in hand. Larger full-surface replacements tied to a kitchen remodel typically run three to five working days, including base work and compaction.
We carry common Unilock trim pieces, edge restraints, jointing sand, and color-match samples on the truck. Specific pavers and wall units are ordered per job to match the exact color lot and chamfer profile, which usually adds two to five days of lead time in Orlando.
Written by Luca Romano, Owner & Lead Contractor, Sawyer Remodel Orlando at Sawyer Remodel Orlando, serving Orlando and nearby areas.
