Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Orlando?
Custom window and door orders in Orlando typically run $8,000 to $25,000 for a full-home impact window package, while a single custom entry door with sidelights usually lands between $2,500 and $8,000 installed. The wide spread comes down to size, material, glass package, and whether you’re ordering one piece or outfitting an entire house. Most Orlando homeowners we work with budget $12,000 to $18,000 for a mid-range project that balances energy efficiency with hurricane protection.
If you want a written number before any work starts, Sawyer Remodel Orlando handles custom window and door orders from measurement through installation. Call (850) 809-0306 and we’ll put a price in writing – not a ballpark, not a “we’ll see,” a real number.
Before we get into the full breakdown, here’s the short version:
Key Takeaways
- Full-home custom window replacement in Orlando: $8,000 – $25,000
- Custom entry door (single, with sidelights): $2,500 – $8,000
- Impact-rated glass adds 15 – 35% over standard low-E
- Labor for window installation runs $150 – $400 per opening in the Orlando metro
- Permit fees in Orange County and Orlando city limits typically add $75 – $250
- Most custom orders take 2 – 6 weeks from approval to installation
Looking for the service page instead? Custom Window & Door Order in Orlando covers how the process works from start to finish. This page is the pricing deep-dive.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what you’re actually paying for when you order custom windows and doors in Orlando. These are line-item ranges based on what we see across Orange, Seminole, and Osceola counties in 2026.
| Line Item | Typical Orlando Cost |
|---|---|
| Standard custom window (vinyl, low-E, single hung) | $450 – $900 per window |
| Impact-rated custom window (aluminum or vinyl) | $800 – $1,600 per window |
| Custom picture window (fixed, large-format) | $1,200 – $3,500 per window |
| Custom entry door (fiberglass, no glass) | $1,800 – $4,500 per door |
| Custom entry door (wood, with glass inserts) | $3,000 – $8,000 per door |
| Sliding glass door (custom size, impact-rated) | $3,500 – $9,000 per door |
| French door system (custom, both panels active) | $4,000 – $11,000 per opening |
| Labor per window opening | $150 – $400 |
| Labor per door opening | $350 – $900 |
| Permit fees (Orlando/Orange County) | $75 – $250 per project |
| Old window/door removal and disposal | $50 – $150 per opening |
Here’s the thing about those numbers: they’re real, but they move. A standard double-hung window in Colonialtown that’s a straight swap runs toward the bottom. The same square footage in a Lake Nona stucco home with a second-story opening and stucco repair work runs toward the top. That’s not contractor markup games. That’s the actual physical difference between jobs.
What pushes a project higher than you’d expect:
- Impact-rated glass – In Orlando, code requires impact protection for any opening replaced in wind-borne debris zones. That’s most of the city proper. Expect 15 – 35% more than a standard low-E package.
- Second-story work – Ladder time, scaffolding, and a second installer on site add labor per opening.
- Stucco or masonry walls – Older Orlando homes (think College Park, Thornton Park, parts of Winter Park) have stucco exteriors. Cutting into stucco and patching it correctly takes more time than siding.
- Custom shapes – Arches, circles, trapezoids, or any non-rectangular opening means a one-off frame build instead of a stock-size custom order.
- Interior trim work – If the old trim gets damaged during removal (it does, often), replacing it inside runs $2 – $6 per linear foot for basic painted trim.
What pushes a project lower:
- Replacing all first-floor windows in a single-story rancher
- Choosing vinyl over wood or aluminum
- Keeping the same rough opening sizes (no reframing)
- Doing a whole-home order at once instead of piecemeal
What Affects Custom Window & Door Order Pricing in Orlando
Six factors drive your final number. None of them are secrets. Here’s what matters in Orlando specifically.
- Hurricane code compliance. Orlando sits in Florida’s high-velocity hurricane zone (HVHZ is Miami-Dade, but Central Florida has its own wind-load requirements). Impact-rated windows or approved shutters are mandatory for new construction and most replacement work. If your home is older and you’re replacing windows, you’ll need to meet current code – that means impact glazing or you’ll pay for shutters separately. The impact package is the biggest single line item difference we see.
- Frame material. Vinyl is the price leader. Aluminum runs 20 – 40% more. Wood runs 50 – 100% more and needs more maintenance in Orlando’s humidity. Fiberglass for doors sits between aluminum and wood. Your neighborhood matters too – homes in Winter Park and Baldwin Park tend toward wood and fiberglass for the look; homes in Conway and Pine Hills lean vinyl for the budget.
- Glass package. Standard low-E double-pane is the baseline. Triple-pane adds insulation but not much hurricane protection. Impact-rated laminated glass is its own category – it’s two panes with an interlayer that holds together when something hits it. In Orlando’s climate, we also recommend a low-E coating tuned for solar heat gain. That thin coating is the difference between an AC unit that keeps up in August and one that doesn’t.
- Opening condition. Rotted sills, termite damage, or framing that’s drifted out of square all add labor. In Orlando’s older neighborhoods – Colonialtown, Delaney Park, Eola Heights – we regularly open up walls and find moisture-damaged framing around old wood windows. That repair cost is real and it’s better to know before we start.
- Manufacturer and lead time. Custom orders from high-end lines (Marvin, Andersen Architectural, PGT for impact) cost more per unit and take longer. Mid-range lines (Simonton, CGI, ESWindows) hit a sweet spot for Orlando. Stock lines at big-box stores are cheaper but rarely fit custom openings without modification, which eats the savings.
- Door hardware and glass options. A custom door with a simple knob set is one price. Add multi-point locking, a smart lock, decorative glass, and a transom window above – that’s another $1,500 – $3,000 on top. In Orlando, multi-point locks matter because a single deadbolt on a wide door with full-glass panels flexes under wind pressure.
Custom Window & Door Order vs. Stock Replacement: What You’re Paying For
Custom doesn’t mean expensive for the sake of it. It means the window is built to the measurements of your actual opening, not the nearest standard size a factory decided to run. Here’s the practical difference.
Stock windows come in standard sizes – 24×36, 30×48, etc. If your rough opening is 27 and 3/8 by 41 and 5/8, a stock window means shimming the gap, which leaves you with narrower glass, more trim, and sometimes visible filler. A custom window is ordered to within 1/8 inch of your actual opening. The window fits the house; the house doesn’t get retrofitted to the window.
For doors, the difference is even bigger. Stock entry doors are typically 36×80. Custom doors can be any width, any height, any glass configuration. In Orlando’s mid-century neighborhoods, 60-year-old door openings are rarely a clean 36×80 anymore. Custom ordering means we build to the opening instead of reframing the opening to fit a stock door.
You pay 15 – 30% more for custom over stock, on average. In return, you get a better fit, better weather sealing, better noise reduction, and a window or door that actually looks like it belongs on your house.
Orlando-Specific Pricing Notes You Won’t Find on a National Site
National pricing guides lump Orlando in with “Florida.” That’s lazy. Here’s what’s actually true in this market in 2026.
Orlando is a competitive market for windows and doors because so many homes were built between 1980 and 2005, and that stock is hitting replacement age at the same time. Competition keeps pricing honest. But two local realities push costs up compared to, say, Tampa or Jacksonville.
First, labor. Orlando’s remodeling trade is stretched thin by year-round demand – there’s no winter slowdown here. Skilled installers who can properly flash and seal a window in a hurricane zone command $25 – $45 per hour more than the Florida average. That’s built into the labor numbers above.
Second, code enforcement. Orange County and the City of Orlando both require permits for window and door replacement, and inspectors here are strict about water intrusion details after a decade of mold litigation. That’s a good thing for you. It means the flashing, the pan, the sealant – all the stuff behind the trim that you never see – has to be right. It also adds a half-day to most projects.
In Windermere, Bay Hill, and Dr. Phillips, we see more wood window and door orders. In Winter Garden and Horizon West, it’s mostly impact-rated vinyl and aluminum for HOAs that require a uniform look across the neighborhood. In College Park and Delaney, it’s about matching the character of a 1950s bungalow with modern-performance glass. Each of those looks at a different price point.
How to Save on Custom Window & Door Order
We’re not going to tell you to cut corners. But there are ways to keep the number honest without ending up with a bad install.
- Do the whole home at once. Mobilization (getting the crew, scaffolding, and dumpster to your house) is a fixed cost whether you’re doing three windows or fifteen. Spreading it over one job means you pay it once. A full-home order also gets better per-unit pricing from manufacturers.
- Pick vinyl over wood for windows. You can’t tell a painted vinyl window from a painted wood window from the curb. What you can tell is the price difference, and in Orlando’s humidity, vinyl won’t rot, swell, or need repainting.
- Choose impact-rated glass only where code requires it. If part of your home falls outside the wind-borne debris zone or you have shutters already, non-impact low-E on those openings saves real money. We’ll map which openings need what – that’s part of the estimate.
- Keep the same rough opening sizes. Moving a window or enlarging a door opening adds framing, drywall repair, and sometimes structural header work. A same-size swap is always cheaper.
- Skip the decorative glass inserts on doors. Leaded glass and custom etched panels are beautiful and they’re also $800 – $2,500 extra per door. A clean fiberglass door with a solid low-E glass package looks modern and costs less.
- Get multiple quotes, but compare apples to apples. A quote for impact-rated PGT windows with a new-construction flange is a different product than a pocket replacement with standard glass. Make sure every quote lists the same glass package, frame material, and warranty. Read the line items. If a contractor won’t itemize, that’s your answer.
And the simplest one: call (850) 809-0306 and get a free estimate from Sawyer Remodel Orlando. The price we put in writing is the price you pay. If we find a problem mid-project, you know about it before it costs you a dollar.
How the Order and Installation Process Works at Sawyer Remodel Orlando
Knowing the process helps you understand the price. Here’s how it goes with us.
Step 1: Measure and consult. We measure every opening precisely, check the condition of the framing and sill, and walk you through material and glass options. This takes about an hour for a typical home. No charge.
Step 2: Written price. You get a line-item estimate with materials, labor, permit fees, and a schedule. This is The Relay Visibility Guarantee in action: a written price before any work starts. No surprise line items at the end.
Step 3: Order. Your custom windows and doors go into production. Lead time is 2 – 6 weeks depending on manufacturer and glass package. We confirm the delivery date with you when the order is placed.
Step 4: Install. Our technicians arrive on a schedule you can track. Background-checked, uniformed, and they’re the ones doing the work – not a sub you’ve never met. Installation takes 1 – 3 days for a typical window package, 1 day for most door swaps.
Step 5: Walkthrough and warranty. We walk every opening with you, show you the flashing and sealing, and answer whatever you want answered. Every project carries our 365-Day Done Right Promise: if it’s not done right, we make it right. In writing. For a full year.
FAQs – Custom Window & Door Order Cost
How much does a custom window order cost in Orlando?
A single custom standard window in Orlando runs $450 – $900, while impact-rated custom windows run $800 – $1,600 per window. A full-home window package for a typical Orlando 3-bedroom runs $8,000 – $20,000 depending on glass rating and frame material. Call (850) 809-0306 for a written estimate on your exact openings.
How much does a custom front door cost in Orlando?
A custom fiberglass entry door runs $1,800 – $4,500 installed. Custom wood doors with glass inserts run $3,000 – $8,000. If you’re adding sidelights, a transom, or multi-point locking hardware, expect the higher end. We’ll give you a precise number before you commit.
Is it cheaper to buy windows from a big-box store than to order custom?
Big-box windows are cheaper per unit – often $200 – $500 per window – but they only fit standard openings. If your opening is off-size (and most Orlando homes have at least a few), you’ll pay $150 – $300 per window in shimming, trim work, and sealing to make stock units work. The installed cost difference shrinks fast, and you end up with less glass area and a worse seal. Custom usually wins on total installed value.
Do I need impact-rated windows in Orlando?
Yes, for most replacement work in Orlando. The city and Orange County require impact protection for windows in wind-borne debris zones, and most of the metro falls into that designation. Impact-rated glass adds 15 – 35% to the window cost compared to standard low-E. If you have existing hurricane shutters, you may be able to skip the impact glazing on some openings – we check what’s required for your specific home.
How long does a custom window and door order take in Orlando?
From approval to installation, expect 2 – 6 weeks. Impact-rated orders from premium manufacturers (PGT, Marvin) run the longer end. Stock-adjacent custom lines (Simonton, ESWindows) often land closer to 3 – 4 weeks. Installation itself is 1 – 3 days for most projects.
Can you replace my windows and doors if I’m not home during the day?
Yes. Most of our Orlando clients are at work during install week. We coordinate access in advance, send photo updates throughout the day, and have someone on-site you can reach by phone at any point. The Relay Visibility Guarantee means you always know who’s at your house, what they’ve done, and what’s next.
Get a Written Price Before You Decide
You shouldn’t have to guess whether custom windows and doors fit your budget. You should have a written number, a clear scope, and a schedule you can plan around. That’s how Sawyer Remodel Orlando works. Luca Romano and the team have been doing this since 2005, and every project – from a single door swap to a full-home window package – runs on The Relay Standard: written price first, live arrival times, photo updates, and a full year of accountability after the job closes.
Call (850) 809-0306 to schedule a free measure and estimate. No pressure. No four-hour windows. Just a real price from a real contractor.
Written by Luca Romano, Owner at Sawyer Remodel Orlando, serving the Orlando metro since 2005.
Pricing reflects the Orlando market as of 2026. Sawyer Remodel Orlando offers free estimates – call (850) 809-0306.
What Our Customers Say
"Booked a kitchen consult online and got a project timeline in the app. Crew texted each morning with the day's plan. Cabinets, counters, and backsplash look great."
- Erin K."Straight talk and simple communication. Every question got an answer by text within the hour."
- Cherie A."Crew cleaned up each day. Swept and wiped down the work area every evening, which I did not expect."
- Joy B.
