Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Orlando?
A metal roof installation in Orlando typically costs between $15,000 and $40,000 for an average single-family home. Most homeowners pay around $22,000 to $28,000 for a standard standing seam metal roof on a 1,800 to 2,200 square foot house. The price varies based on metal type, roof complexity, and whether the old roof needs to come off first.
If you’re pricing out options for your Orlando home, call Sawyer Remodel Orlando at (850) 809-0306 for a written estimate. Luca Romano and our team put every number in writing before a single tool is picked up, so you’ll know exactly where you stand.
Key Takeaways:
- Typical metal roof installation in Orlando: $15,000 to $40,000
- Average cost for a standard home: $22,000 to $28,000
- Standing seam runs higher than corrugated or stone-coated steel
- Most metal roofs last 40 to 70 years in Florida’s climate, far longer than asphalt shingles
- Installation usually takes 3 to 7 days depending on roof size and complexity
Metal Roof Installation Cost Breakdown (2026)
Here’s a line-item look at where the money goes on a typical Orlando metal roof job. These reflect the Orlando market as of 2026, based on what we see on real projects across Orange County.
| Cost Component | Typical Range (Orlando Market) |
|---|---|
| Standing seam metal panels | $8,000 – $18,000 |
| Crimp or exposed fastener panels | $5,500 – $10,000 |
| Stone-coated steel shingles | $10,000 – $16,000 |
| Underlayment and waterproofing | $1,500 – $3,500 |
| Roof tear-off and disposal (if needed) | $1,800 – $4,000 |
| Flashing, trim, and ridge caps | $1,200 – $3,000 |
| Labor and installation | $4,000 – $9,000 |
| Permits and inspection fees (Orange County) | $350 – $900 |
These numbers assume a single-story home with a moderately complex roofline. Second-story work, steep pitches, or lots of valleys and hips push labor higher. If you have an older Orlando home in College Park or Delaney Park with the original roof still beneath, the tear-off cost lands at the top of that range.
What drives cost up or down most in this market: metal type is the single biggest variable. A corrugated exposed-fastener roof will land near the bottom of the range. Standing seam with hidden fasteners, which means a cleaner look and fewer leak points, runs higher. Stone-coated steel sits in the middle on cost but gives you a look closer to tile or shingle, which buyers in places like Winter Park tend to favor for curb appeal.
Metal Roof Cost by Home Size in Orlando
Roof size, not just square footage of living space, determines the final price. Here’s how it typically breaks down:
- Under 1,200 sq ft home: $12,000 – $20,000
- 1,200 to 1,800 sq ft home: $16,000 – $28,000
- 1,800 to 2,500 sq ft home: $20,000 – $35,000
- 2,500 to 3,500 sq ft home: $28,000 – $45,000
- Over 3,500 sq ft home: $40,000 – $60,000+
Roof pitch matters more than homeowners expect. A steep roof on a two-story home in Baldwin Park means harnessed crews, slower work, and more safety equipment. That labor line goes up accordingly.
What Affects Metal Roof Installation Pricing in Orlando
Every roof is different, but these are the factors we see move the needle most on Orlando projects.
- Metal type and panel profile. Standing seam with hidden fasteners costs 30 to 50 percent more than exposed fastener panels. Stone-coated steel lands between them. You’re paying for both looks and longevity.
- Roof complexity. Hips, valleys, dormers, and multiple roof planes mean more cutting, more flashing work, and more hours of labor. A simple gable roof costs less per square foot than a complex Florida mid-century with five different planes.
- Tear-off vs. overlay. While some homes can take a metal roof over one layer of shingles, most Orlando codes require a clean deck for proper installation. Removing the old roof and hauling it away adds $1,800 to $4,000 depending on size.
- Underlayment requirements. Florida’s high-velocity hurricane zone codes require specific synthetic underlayments and sealing methods. These aren’t cheap, but they are not optional either, and they protect the roof from wind-driven rain during tropical storm season.
- Time of year. Spring and fall are peak roofing months in Orlando. Scheduling flexibility can sometimes yield better pricing during slower periods, though metal roofing crews stay fairly busy year-round.
- Home height and access. Single-story homes with easy access cost less to roof than two-story homes or homes with tight setbacks where a ladder can not reach the roofline directly. Crews need staging sometimes, and that adds labor time.
Metal Roof Installation Cost vs. Other Roofing Options in Orlando
Homeowners often ask whether metal is worth the premium over asphalt shingles. Here’s a direct comparison of what we see across Orlando:
- Asphalt shingle roof: $8,000 – $20,000 (lasts 18 to 25 years in Florida heat and sun)
- Metal roof: $15,000 – $40,000 (lasts 40 to 70 years, often still under warranty when the home is resold)
- Concrete tile roof: $18,000 – $45,000 (looks great on Mediterranean styles, but heavy and costly to repair)
Metal roofs pay off over time because you likely will never replace the roof again as long as you live in the home. In neighborhoods like Audubon Park or Thornton Park where homes sell regularly, a metal roof is also a listing feature, not just an invisible upgrade. Buyers recognize lower insurance premiums and lower maintenance when they see one.
Speaking of insurance: many Orlando homeowners see a reduction in wind mitigation credits with a properly installed metal roof. Your insurance agent can run a wind mitigation inspection after installation. Some homeowners report savings that help offset the upfront metal cost over several years.
How Much Does a Standing Seam Metal Roof Cost in Orlando?
A standing seam metal roof in Orlando typically costs $20,000 to $40,000 for an average single-family home. That’s the premium option within metal roofing. The panels lock together with hidden fasteners, which eliminates thousands of exposed screw points that corrugated panels have.
Standing seam is what most people picture when they think “modern metal roof.” It is clean, vertical, and works on both contemporary builds and renovated mid-century homes in neighborhoods like Lake Lawsona. The material costs more than exposed fastener panels, and the installation requires more skill because every seam needs to be locked and the panels need to move slightly with expansion and contraction of the metal under Florida sun.
If you are weighing standing seam versus a shingle-style stone-coated steel, figure out what matters more: the clean vertical panel look, or matching the existing roof aesthetic of your street. Both perform well. Both carry decades-long warranties.
How to Save on Metal Roof Installation in Orlando
Metal roofing is a big investment, but there are ways to keep the number reasonable without cutting corners on materials or labor.
- Get at least three written quotes. Different companies price the same roof differently depending on their labor rates, equipment, and backlog. A written quote lets you compare line by line.
- Choose exposed fastener panels if budget is tight. You sacrifice some longevity and looks, but you still get a metal roof that will outlast any asphalt shingle roof.
- Replace the roof before it fails completely. If your old roof is leaking and rotting, the decking underneath may need replacement. That adds thousands. Catch it earlier and the deck stays intact.
- Ask about off-season scheduling. In Orlando, late summer and late winter can be slower. You might get better scheduling flexibility even if the price per square foot stays the same.
- Check for manufacturer rebates. Brands like GAF and CertainTeed sometimes run promotions on metal roofing lines. Ask your installer if any manufacturer-backed incentives apply to your job.
Sawyer Remodel Orlando gives you a written price before any work starts. No percentage games, no “we’ll figure it out as we go.” Luca’s policy is simple: the number on the invoice is the number you approved. Call (850) 809-0306 and we will walk the roof with you and give you a real number.
Why Metal Roofing Makes Sense for Orlando Weather
Orlando’s climate punishes roofs in ways that northern climates do not. Three specific conditions make metal a smart choice here:
1. UV exposure and heat. Orlando gets over 230 sunny days per year, and asphalt shingles bake under that kind of UV. Granules wear off, shingles curl, and a 20-year shingle roof often needs replacement at year 12 or 13. Metal reflects more sunlight and does not degrade the way asphalt does. The energy savings on cooling can be noticeable in older homes, especially those with less attic insulation.
2. Hurricane season wind. Standing seam metal roofs are engineered for high wind uplift resistance. Florida building code requires roofing systems to meet specific wind load ratings. A properly installed standing seam metal roof holds up better than shingles in a wind event because the panels interlock and are fastened with concealed clips, not exposed nails that loosen over years of heating and cooling cycles.
3. Humidity and rain cycles. The daily summer thunderstorms in Orlando create a moisture cycle that deteriorates organic materials. Metal does not absorb water, does not grow moss, and dries fast after a downpour. That means fewer leak points over time compared to shingle systems where moisture gets under lifted edges.
One thing to note: metal roofs require specific underlayment in this climate. Condensation can form on the underside of the metal panels when humid air meets a temperature shift. A high-quality synthetic underlayment with proper ventilation details is a must in central Florida. Cheap underlayment is where we see corners get cut, and it almost always leads to problems a few years in when the homeowner can no longer find the installer.
Orlando Permits and Codes for Metal Roof Installation
Metal roof installation in Orlando requires a building permit through the City of Orlando or Orange County, depending on where the home sits. Permits generally run $350 to $900 and include the required inspections after installation.
Florida building code has specific requirements for metal roofing in high-velocity wind zones. The key ones for Orlando homeowners:
- Panels must meet Miami-Dade County Product Approval or Florida Building Code approval standards for wind uplift.
- Underlayment must meet the code-prescribed synthetic type for metal panels.
- The roof deck must be inspected before installers lay underlayment.
- A final inspection is required before the permit closes.
Any licensed Orlando roofing contractor handles permits as part of the job. If someone offers to skip the permit to save you a few hundred dollars, walk away. Unpermitted roof work comes up during home sales and insurance claims, and it costs more to fix then than it ever saved upfront.
Sawyer Remodel Orlando handles permit pull, inspection scheduling, and the final sign-off. You will get photo updates before and after the work as part of our relay standard process, so you can see what is happening up on that roof without climbing a ladder yourself.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost per square foot in Orlando?
Metal roof installation in Orlando runs $9 to $18 per square foot installed, including materials, labor, and underlayment. Standing seam systems run higher per square foot than exposed fastener panels. An average 2,000 square foot roof at $12 to $14 per square foot lands you around $24,000 to $28,000. Call (850) 809-0306 for a precise number on your roof.
Is a metal roof worth the cost in Florida?
A metal roof costs roughly $15,000 to $40,000 in Orlando compared to $8,000 to $20,000 for asphalt shingles. The metal roof lasts 40 to 70 years versus 18 to 25, often still performing when the home is sold. For many Orlando homeowners, especially those planning to stay in the home long-term, metal is the better financial choice despite the higher upfront cost. We can walk you through the math on your specific house.
How long does metal roof installation take in Orlando?
Most metal roof installations in Orlando take 3 to 7 days from tear-off to final inspection. A simple ranch home with an easy roof may finish in 3 to 4 days. A larger two-story home with multiple planes and a full tear-off can push to 7 days. Weather delays happen in summer, but our crews work around the afternoon thunderstorm patterns that are part of Orlando life.
Do I need to replace the underlayment when installing a metal roof?
Yes. Installing a metal roof over old, worn underlayment will fail in Orlando’s humidity. New synthetic underlayment runs $1,500 to $3,500 depending on roof size and is mandatory under Florida code. It is not a corner to cut. We include it in every quote we write.
Can I install a metal roof over existing shingles in Orlando?
Some Orlando homes can take a metal roof over one existing layer of shingles, but this is not always the best route. It saves $1,800 to $4,000 in tear-off costs, but it can hide decking problems and shortens the life of the new roof. We inspect the deck and give you a straight answer on whether it is safe or whether the old roof needs to come off first. Get a free inspection at (850) 809-0306 before you decide.
Get a Written Metal Roof Price in Orlando
You should not have to guess whether a metal roof fits your budget. Sawyer Remodel Orlando puts the price in writing before any work starts. Luca Romano and our team will inspect your roof, discuss the metal options that make sense for your home, and give you a clear number you can plan around.
We are part of the Relay Home Co. family, and every project runs under the same standard: written price before work begins, live arrival time tracking, and photo updates so you always know what is happening on your roof. Our 365-Day Done Right Promise backs every installation in writing. If it is not done right, we make it right within a full year of the project closing.
Call (850) 809-0306 today for a free metal roof estimate in Orlando. A real person answers, and we will schedule a time that works for you.
Pricing reflects the Orlando market as of 2026. Sawyer Remodel Orlando offers free estimates – call (850) 809-0306.
Written by Luca Romano, Owner at Sawyer Remodel Orlando, serving Orlando since 2005.
What Our Customers Say
"Good renovation. The countertop slipped a week, but I got a text and a new date right away."
- Dina M."Solid job. A few punch list items took a week, but they were done."
- Ike F."Quote was itemized and every change was approved in the app."
- Sasha L.
